And someone on this list can correct me if I am wrong but TDM40P is up to a 4 port FXS device so your signalling should be of one of the fxo derivitives. Right?
-----Original Message-----
From: Eduardo Goncalves [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 01, 2003 03:46
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Seting up TDM40B
On Fri, 1 Aug 2003 15:25:49 -0500
"McAughan, Matt" <[EMAIL PROTECTED]> wrote:
> Have you setup the zaptel.conf and zapata.conf configuration files for >how
> ever many ports you have on the card and then run the ztcfg -vvvc >command?
>
Since the module aren't loaded, config zaptel.conf, zapata.conf and run ztcfg will not work, right?
my conf files:
===========
zaptel.conf
===========
fxsls=1-4
loadzone = us
defaultzone=us
===========
zapata.conf
===========
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=yes
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
group=1
immediate=no
context=pstn
signalling=fxs_ks
channel=1-4
thanks
[]'s
Eduardo
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
