If I understand this correctly.. Your channel bank will convert analog FXO & FXS to a T1 then you slap a Wildcard T100P in your linux box then your all set. It shouldn't matter if the channel bank is compatible with linux or not because you are going to terminate with a T1 cross over to your linux box.
bkw On Mon, 4 Aug 2003, Steve Meyers wrote: > Where can I find a good tutorial on how channel banks work? I need to > get a 6 port (or so) channel bank for FXO. I need to find some > information on which ones are supported well under Linux and with > Asterisk, how to configure them, what specifically to look for in a > channel bank, etc. I'm pretty new to all this, so I'm not familiar with > a lot of the terms and such. > > Thanks! > > Steve > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users