On Wed, 2003-08-13 at 09:46, Dave Cotton wrote: > I've had a few problems with my system holding the line after a call has > been made, just now I rebooted and noticed the following in > /var/log/messages
When you say "holding the line", do you mean that asterisk still believes a channel is in use even after you hang up? If so, I've seen the same thing happen several times with the X100P. If I do "show channels" it will show one of my SIP phones connected to one of the outside lines, but if I check that SIP phone, it is not in use, and there is no way to re-activate the channel from the SIP phone. Running "soft hangup <zap channel>" will hangup the channel (you don't need to reboot). I'm not entirely sure what causes it. So far, I've only seen it happen from 2 of our 9 SIP phones, but they're the ones most often on the phone. It always involves an outside line, so I believe the X100P is the problem, but I can't be sure. What other information can I gather to pinpoint the problem? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users