One variance to the configuration that was described is that I am using a Cisco ATA186 rather than a 7960 IP phone. I have tried configuring the ATA with in-band DTMF and out-of-band DTMF both where unsuccessful.
Jay -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeremy McNamara Sent: Tuesday, August 12, 2003 11:53 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] chan_h323, Asterisk and DTMF issue We use rfc2833 for everything and have no trouble. Make sure your 7960 is sending the right indications. Jeremy McNamara Jay Sakata wrote: >I have the same problem that Michael describes below does anyone have any recommendations? > > > >Jay > > > >_______________________________________________________________________ _______________________ > > > > Hi folks, > > > >I'm using chan_h323 to dial out to a gateway which connects me to the PSTN. > >In order to use a menu system such my bank menu system, I have to set > >dtmfmode=info in my sip.conf for my Cisco 7960 phone. However, dtmfmode=info > >won't work with Asterisk's voicemail system. > > > >I'm using the g.729 codec for h323 and Asterisk. I'm told dtmfmode=inband > >won't work with g.729. Is it possible to use dtmfmode=info with h323 and > >access my Asterisk voicemail? > > > >Summary: > >dtmfmode = info ; works with h323 not with Asterisk > >Voicemail > >dtmfmode = inband ; works with h323 (with a flood of warnings) not > >with Asterisk Voicemail > >dtmfmode = rfc2833 ; works with Asterisk Voicemail not with h323 > > > >Any help would be greatly appreciated. > > > >Thanks, > > > >Michael > > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
