I am trying to do the same thing you are doing. I am new to asterisk and a friend of mine owns a carrier. They are using vocal data as the platform, which is sip capable and uses sip phones. What I was trying to do as well is register * with the redirect/registers with the carrier so that they can route my outbound calls outside of the LAN. All internal calls would remain the responsibility of Asterisk. Is this possibly the same thing you are trying to accomplish?
Steve -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ian Blenke Sent: Tuesday, August 12, 2003 12:06 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Working with FWD, IPTel, SIPPhone? I'll admit it. I'm a asterisk newbie (but no stranger to telephony). The setup is simple: two Grandstream BudgeTel 100 phones (SIPPhone specials) on a private segment calling to a Linux box acting as the segment's firewall with a leg on our public network. The phones are setup as SIP/phone1 (x1000) and SIP/phone2 (x1001), respectively (thanks to the Asterisk HOWTO). Getting IAX to work with IAXTEL wasn't a problem, but I'm still fighting with inbound/outbound VoIP "trunks" with IAX2 or anything SIP. I can call 1700NXXNXXX IAXTEL numbers, and anything gatewayed from that network (ie, FWD 170099XXXXX gatewayed numbers work). To get FWD, IPTel, or SIPPhone to work, I've deduced I need to do something like the following after reading various online email archives (please correct me if I'm wrong): sip.conf: [general] register => XXXXX:[EMAIL PROTECTED]/1000 register => 1747XXXXXXX:[EMAIL PROTECTED]/1000 register => username:[EMAIL PROTECTED]/1000 extensions.conf: [default] include=sip [sip] include=sip [fwd] exten => _91339.,1,SetCallerID(XXXXX) exten => _91339.,2,Dial,SIP/${EXTEN:[EMAIL PROTECTED],tr exten => _91747.,1,SetCallerID(1747XXXXXXX) exten => _91747.,2,Dial,SIP/${EXTEN:[EMAIL PROTECTED],tr exten => _91478.,1,SetCallerID(XXXXXXXX) exten => _91478.,2,Dial,SIP/${EXTEN:[EMAIL PROTECTED],tr Unfortunately, this doesn't appear to work. Nor do any other translations (even a simple "_8." doesn't work). No matter what I try, I keep getting "404 Not found" or "all circuits are busy" messages. As far as I can tell, I'm registered with with all three SIP providers: *CLI> sip show registry 195.37.77.101:5060 username 120 Registered 192.246.69.223:5060 XXXXX 120 Registered 130.94.123.252:5060 1747XXXXXX 120 Registered I'm also apparently registered correctly with IAX and IAX2: *CLI> iax show registry Host Username Perceived Refresh State 12.37.165.130:5036 username 66.x.x.x:5036 60 Registered *CLI> iax2 show registry Host Username Perceived Refresh State 12.37.165.130:4569 username 66.x.x.x:4569 60 Registered Unfortunately(?), any calls through IAX2 never seem to go through. While I'd like to eventually setup an outbound NAT proxy, I've had a difficult time decyphering how to configure SER, siproxd, or PartySIP to register to external SIP providers like FWD, IPTel, and SIPPhone. I'm guessing this is what the additional sections in sip.conf are for? sip.conf ;; Free World Dialup Proxy [fwd.pulver.com] type=friend host=fwd.pulver.com fromuser=48702 fromdomain=fwd.pulver.com ;secret=password ;username=XXXXX Do you need these sections if you're not NATting? How would I define fwdnat.pulver.com:5082 above? (asterisk appears to treat the whole string as a hostname). At some point, I'd like to have branch offices off of IPSEC tunnelled connections - running an Asterisk instance on every customer's firewall isn't as appealing as a simple SIP proxy. I guess the confusion is: how do you setup a SIP Provider *and* an outbound proxy (either locally on my linux firewall, or provided by the SIP carrier?) This really could use a good HOWTO/FAQ, but for the life of me I can't find it (if someone would take the time to guide me a bit with this, I wouldn't mind taking a stab at writing one). Thanks, -- - Ian C. Blenke <[EMAIL PROTECTED]> (This message bound by the following: http://www.nks.net/email_disclaimer.html) _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
