Well I wasn't sure :) But if it works than it works :) Martin
On Thu, 14 Aug 2003, Brian West wrote: > Accually it will work with any codec if you use rfc2833. G711 is only > needed if you are passing DTMF inband. > > bkw > > On Thu, 14 Aug 2003, Martin Pycko wrote: > > > It works only with G711 (ulaw/alaw) > > > > regards > > Martin > > > > On Thu, 14 Aug 2003, Dan wrote: > > > > > Hi, > > > > > > I cannot use '#' to initiate transfers. > > > I have tried on different phones (7960, ATA, X-Lite). > > > When I press '#' during a call, nothing happen. > > > I have both T and t switches in Dial application. > > > The transfer function works with Flash key on ATA, but in a very strange > > > way....The final destination is hunged up and then automatically called by > > > the initial caller... This behavior request to put on hook the phone > > > connected to the ATA in order to accept the transfer. During this period the > > > phone is busy for the caller, so I must use some tricks in the dialing macro > > > in order to acomodate this. > > > > > > Any other suggestions to better solve the transfer function? > > > > > > > > > BR, > > > Dan > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
