Hi Dan, I use panasonic DECT phones, when plugged into a TDM20B (2 port FXS card from Digium) I get caller id passed through (name AND number) although i can't get callerid via the pstn at the moment (located in nl) i do get it for VoIP calls. Plus when a pstn call comes in and there is no clid (ie all the time!) I force asterisk to set the caller id to "PSTN Call" <my pstn number>
The panasonic was purchsed in Currys in the UK ... personally I think that the panasonic's understand all eu caller id standards (I can't prove this) and just sell the same model throughout europe... Certainly the manual seems to cover all european languages... It may not be what you want to hear but I'd seriously consider getting an fxs card.. Andy *********** REPLY SEPARATOR *********** On 08/08/2003 at 13:45 Dan wrote: >Hi, > >I have two DECT cordless phones (one Philips Onis 6311 and one Philips >Onis2 >Memo-6511). >The first one is for the french standard and the second one for the british >standard. >Both of them have callerid functionality. >The british one does not show anything when connected to my PSTN line. >I have not yet tested the french one. >What I want to do is to connect both of them to the same ATA box. >There is any possibility to program callerid functionality in ATA in order >to have different callerid standard on each port? >It would be nice to use this to get callerid functionality on both phones, >as the X100P card takes it from the PSTN line. >Any hint or experience is wellcome. > >Thanks, >Dan > >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
