I would use the latest CVS for one. And try again. bkw
On Wed, 20 Aug 2003, Ian Blenke wrote: > I'm attempting to get two Asterisk 0.4.0 PBXes to communicate with one > another using IAX/IAX2 trunks. > > I've managed to get a semi-functional NAT Firewall working as a PBX > (with Asterisk running directly on the firewall itself), but there are > issues with bind()ing to various interfaces which is causing outbound > SIP issues. > > To get around these issues, the idea is to do something like this: > > Internet > | > ------- > | | > | Public PBX > | > NAT Firewall > | > ---------------- > | | | > Private PBX Phone Phone ... > > > This way we can run private Asterisk PBXes behind NATting firewalls that > register with a central "public" Asterisk PBX using IAX/IAX2. The phones > can merrily run SIP to the local Private PBX without worrying about NAT > headaches or outbound proxies. > > I've managed to get the PBXes to mutually register correctly: > > Public PBX: > > *CLI> iax show users > Username Secret Authen Def.Context A/C > privatepbx rsa default No > > Private PBX: > > *CLI> iax show registry > Host Username Perceived Refresh State > x.x.x.x:5036 privatepbx x.x.x.x:5036 60 Registered > > *CLI> iax2 show registry > Host Username Perceived Refresh State > x.x.x.x:4569 privatepbx x.x.x.x:4569 60 Registered > > On the Public PBX, I added: > > iax.conf: > > [privatepbx] > type=friend > host=dynamic > ;trunk=yes ;<-- doesn't work without a zap interface for timing > context=outgoing > auth=rsa > inkeys=privatepbx > outkeys=publicpbx > qualify=yes > > extension.conf: > > [outgoing] > include => iaxtel ; IAXTEL > include => fwd ; fwd.pulver.com > include => iptel ; iptel.org > include => sipphone ; SIPPhone.com > include => commx ; CommunicationsXchange.com > > On the Private PBX, I've added what I think are the appropriate sections: > > iax.conf: > > [general] > register => privatepbx:[EMAIL PROTECTED] > > extension.conf: > > [outgoing] > switch => IAX/privatepbx:[EMAIL PROTECTED]/outgoing > ;exten => s,1,Dial(IAX/privatepbx:[EMAIL PROTECTED]/outgoing,20,tr) > > Whenever I try to route an outbound call, however, I get the following > errors on the private PBX: > > WARNING[15376]: File chan_iax.c, Line 4837 (find_cache): Unable to > generate call for 'privatepbx:[EMAIL PROTECTED]/outgoing' > WARNING[15376]: File chan_iax.c, Line 4957 (iax_exists): Unable to make > DP cache > WARNING[15376]: File chan_iax.c, Line 4837 (find_cache): Unable to > generate call for 'privatepbx:[EMAIL PROTECTED]/outgoing' > WARNING[15376]: File chan_iax.c, Line 4979 (iax_canmatch): Unable to > make DP cache > > No IAX traffic appears to go out in response to this.. so I'm guessing I > have another problem. > > Can anyone help point me in the right direction? > > -- > - Ian C. Blenke <[EMAIL PROTECTED]> > (This message bound by the following: > http://www.nks.net/email_disclaimer.html) > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users