On Wed, 2003-09-03 at 15:26, Master Abi wrote: > JT, > > We use 2 providers iPCB.NET and NTT (backup) and both require signalling > on TCP only. Interestingly, I find this to be the norm amongst Cisco > powered providers. > > As * marches on to the #1 telco product and SIP to the #1 protocol of > choice, "protocol=[tcp,udp,auto]" feature is a good idea in sip.conf. I > will add it as a feature.
If asterisk moves up to #1 telco product, SIP will be #2 signalling product as everyone tools up for IAX. Why have the problems of SIP and NAT when IAX deals with it better? > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of John Todd > Sent: Thursday, 4 September 2003 3:54 AM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] SIP on TCP > > > >Hi > > > >I read through the archives but could not find much reference to * > >using SIP on TCP instead of UDP for signalling. Can * be > >configured and if so how. My service provider will only accept SIP > >signalling on TCP. > > > >Thanks > > > >Master > > Out of curiosity, what SIP provider is that? I've never seen any SIP > providers that even support SIP over TCP, much less mandate it. > > If that is required, maybe a "protocol=[tcp,udp,auto]" feature is a > good idea in sip.conf. > > JT > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
