Lets say that you have two phones: Zap/1 and Zap/2 and there comes a call over IAX to Zap/1 since channel 1 is in the callgroup 1 and channel 2 is in the pickupgroup 1 channel 2 can dial *8 and pick up the call that comes to channel 1.
Martin On Thu, 4 Sep 2003, Mickey Binder wrote: > I must be getting something wrong about this call pickup. > > In zapata.conf I have just the default callgroup=1 and pickupgroup=1. If I > call from my mobile to * and then try to dial *8 from any other phone than > the one which is ringing I just get a "Nothing to pick up" answer on my * > console. > > I also have experimented with those parameters in sip.conf but are not aware > of exactly where to use them. Can those be put under the [general] section > or should they go under each user definition? > > regards > Mickey Binder > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users