> I'm asking because I have Asterisk running behind a NAT firewall > along with an IP Phone (software) and I'm trying to get it > working with Iconnecthere (ICH). I am able to register, connect > , but no audio. I have ports opened up on the firewall, but > they point to the Asterisk machine and not the IP phone machine. > In this scenario, any audio traffic would have to go through the > asterisk box to reach the IP phone. Is that how it works?
I was using a sniffer a few minutes ago to identify an issue between a cisco 7960 and ata186. The call setup occurs between the phones and asterisk on udp 5060 (both source and destination ports), but the actual conversation was directly between the phones (in at least this one example) on udp ports 23570 and 10000, with 180 byte data payloads occuring approximately every 20 milliseconds. Another call between XLite and a Snom 200 used udp ports 8000 and 10018 directly between the phones. The above is only intended to point out the NATing issues associated with using voip through a firewall. Rich _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users