neat! actually we are just in the process of planning for an asterisk based simulation lab for the university. do you have a cable pin-out descriptions for that purpose? thanks!
~kelvin ----- Original Message ----- From: "Steven Critchfield" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, September 08, 2003 12:52 PM Subject: Re: [Asterisk-Users] how to connect 2 TE410P > On Sun, 2003-09-07 at 23:24, Kelvin Chua wrote: > > hi guys, > > > > do you have any suggestions on how to connect 2 TE410P via E1? (for > > simulation and testing purposes) > > > > asterisk1 --> TE410P ----> ? ---------> ? ---->TE410P -->asterisk2 > > T1/E1 cross over cable. Or another possible route without needing the > second TE410P card is to use a cross over cable to attach port x to port > y of the same card. Let asterisk control port x and then use something > like my perl wrapper to make calls via port Y. > -- > Steven Critchfield <[EMAIL PROTECTED]> > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
