Try this: Dial(Zap/g4/123456,20,t)
I've found that mixing | in a Dial() can cause a problem. I don't know why and I don't know when, but I had a problem. or this: Dial(Zap/1/123456,20,t) Just in case you have some problem with your group= settings. On Mon, 2003-09-08 at 02:16, Surajee Ratnayake wrote: > hi, > > yes we tried without |t, but it didn't work.. > still keeps on ringing forever... > :-( > > Surajee > > > ----- Original Message ----- > From: Surajee Ratnayake > To: [EMAIL PROTECTED] > Sent: Monday, September 08, 2003 12:49 PM > Subject: [Asterisk-Users] Call Time out Problem-Very Urgent! > > hi, > > I have a problem in call time out, > An ISDN PRI E1 from PSTN and another ISDN PRI E1 from a > Nortel PBX is conneted to my server. > But when i do a Dialout(from both E1s)the calls do not > timeout. > For ex. > Dial(Zap/g4/123456|20|t) > > suppose other side is ringing and is not answering. > even after 20 seconds, call doesn't get timeout > > pls gv me a solutions.. > its really urgent.. > > Surajee -- BTEL Consulting 850-484-4535 x2111 (Office) 504-595-3916 x2111 (Experimental) 877-552-0838 (Backup Phone) _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users