Sometimes it happened that error to me. Reinitiating Linux and proving again (modprobe/insmod), the error disappeared.
----- Original Message ----- From: "Eric Wieling" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, September 09, 2003 9:48 PM Subject: Re: [Asterisk-Users] help on MOH config, pretty close? > The source code for your kernel is not the same as the kernel actually > running on the machine. > > On Tue, 2003-09-09 at 20:38, Rich Adamson wrote: > > After following your suggestions, I get.... > > > > [EMAIL PROTECTED] zaptel]# /sbin/modprobe ztdummy > > /lib/modules/2.4.20-18.9/misc/zaptel.o: kernel-module version mismatch > > /lib/modules/2.4.20-18.9/misc/zaptel.o was compiled for kernel version 2 > > .4.20-6 > > while this kernel is version 2.4.20-18.9. > > /lib/modules/2.4.20-18.9/misc/zaptel.o: insmod /lib/modules/2.4.20-18.9/misc/zap > > tel.o failed > > /lib/modules/2.4.20-18.9/misc/zaptel.o: insmod ztdummy failed > > [EMAIL PROTECTED] zaptel]# > > > > I should have two X100P Digium cards arriving tomorrow. Rather then mess with this, > > should I just wait until those cards are installed? > > > > > > ------------------------ > > > If I'm not mistaken, ztdummy makes work moh and meetme... > > > Do lsmod from sh. If you don't see ztdummy, download zaptel, and modify > > > Makefile. Line 89 must be: > > > > > > MODULES=zaptel.o tor2.o torisa.o wcusb.o wcfxo.o wcfxs.o \ > > > ztdynamic.o ztd-eth.o wct1xxp.o wct4xxp.o ztdummy.o > > > > > > (Remove # preceding ztdummy.o) > > > > > > Then, do a make and make install. When finish, do: > > > > > > modprobe ztdummy > > > > > > Meetme and MOH should work now. > > > > > > > > > ----- Original Message ----- > > > From: "Rich Adamson" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Tuesday, September 09, 2003 9:59 PM > > > Subject: RE: [Asterisk-Users] help on MOH config, pretty close? > > > > > > > > > > The show modules command line suggests that is Not loaded. Should if be, > > > and > > > > if so, where do I do that? > > > > > > > > Rich > > > > > > > > ------------------------ > > > > > Do you have loaded ztdummy as module? > > > > > > > > > > > > > > > -----Mensaje original----- > > > > > Trying to test the music on hold function and can't seem to get it to > > > work. > > > > > If anyone has it running, could you give me a clue? (I have googled and > > > > > found lots of questions, but no real suggestions.) > > > > > > > > > > I downloaded and installed the mpg123 package. From the RH9 console I > > > can > > > > > start the executable and hear the music via the speakers. The executable > > > > > is located in /usr/bin. (That works!) > > > > > > > > > > I set the following line in musiconhold.conf file: > > > > > default => mp3:/var/lib/asterisk/mohmp3/ > > > > > and when I do a ps ax |grep mpg123 I get: > > > > > 15798 pts/0 S 0:00 /usr/bin/mpg123 -q -s --mono -r 8000 -b > > > 2048 > > > > > For-You.mp3 > > > > > If I stop asterisk, the above line disappears. (That works!) > > > > > > > > > > For lab work, the sip.conf has: > > > > > allow=ulaw > > > > > only. > > > > > > > > > > In the zapata.conf file I have: > > > > > musiconhold=default > > > > > > > > > > On asterisk startup, the console window shows: > > > > > == Parsing '/etc/asterisk/musiconhold.conf': Found > > > > > WARNING[1074504864]: File res_musiconhold.c, Line 506 (moh_register): > > > > > Unable to > > > > > open pseudo channel for timing... Sound may be choppy. > > > > > == Registered application 'MusicOnHold' > > > > > == Registered application 'WaitMusicOnHold' > > > > > == Registered application 'SetMusicOnHold' > > > > > which looks like its okay. > > > > > > > > > > The the asterisk command line, I see: > > > > > -- Called 3002 > > > > > -- SIP/3002-3ed3 is ringing > > > > > -- SIP/3002-3ed3 is ringing > > > > > -- SIP/3002-3ed3 answered SIP/3000-0e7b > > > > > -- Attempting native bridge of SIP/3000-0e7b and SIP/3002-3ed3 > > > > > -- Started music on hold, class 'default', on SIP/3002-3ed3 > > > > > but nothing is heard on either C7960's or Snom 200. > > > > > > > > > > I have not modified anything in sip.conf or extensions.conf; am I > > > suppose > > > > > to? > > > > > > > > > > What am I missing???? > > > > > > > > > > Rich > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > Asterisk-Users mailing list > > > > > [EMAIL PROTECTED] > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > _______________________________________________ > > > > > Asterisk-Users mailing list > > > > > [EMAIL PROTECTED] > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > ---------------End of Original Message----------------- > > > > > > > > > > > > _______________________________________________ > > > > Asterisk-Users mailing list > > > > [EMAIL PROTECTED] > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > ---------------End of Original Message----------------- > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > -- > BTEL Consulting > 850-484-4535 x2111 (Office) > 504-595-3916 x2111 (Experimental) > 877-552-0838 (Backup Phone) > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
