I have gotten a Howlink CL-100 working with chan_h323, but I forget the exact details. I think I had to disable fast_start & a few other things on both ends. Nick On Fri, Sep 12, 2003 at 10:17:39PM -0700, [EMAIL PROTECTED] wrote: > I'm trying to use a Howlink CL-100 ip phone with * > > It's h323 phone with very limited protocol support. But it's enough that I > can use it to dial netmeeting client and artisoft pbx just fine. > > When I try to dial my * with it using either chan_h323 or oh323, it seems > to fail on negotiating H245. Maybe this phone doesn't support it? > > I've used all different versions of pwlib/openh323 from most recent to > older ones like 1.4.9 and both chan_h323 and oh323 and have no success. > > Here's trace output from chan_h323: > > 0:26.010 H323 Listener:80f1b50 transports.cxx(1423) H323TCP Started > connection: host=XXX.XXX.XXX.251:1094, if=XXX.XXX.XXX.252:1720, handle=27 > 0:26.011 H225 Answer:40419ae0 transports.cxx(524) H225 Started > incoming call thread > 0:26.011 H225 Answer:40419ae0 transports.cxx(984) H225 Awaiting > first PDU > 0:26.029 H225 Answer:40419ae0 h323pdu.cxx(474) H225 Receiving > PDU: setup > 0:26.029 H225 Answer:40419ae0 transports.cxx(993) H225 Incoming > call, first PDU: callReference=32 > 0:26.029 H225 Answer:40419ae0 h323caps.cxx(1626) H323 Added > capability: SpeexNarrow-5.95k{sw} <1> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1626) H323 Added > capability: SpeexNarrow-8k{sw} <2> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1626) H323 Added > capability: SpeexNarrow-11k{sw} <3> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1626) H323 Added > capability: SpeexNarrow-15k{sw} <4> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1626) H323 Added > capability: SpeexNarrow-18.2k{sw} <5> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1626) H323 Added > capability: G.723.1{sw} <6> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1626) H323 Added > capability: GSM-06.10{sw} <7> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1626) H323 Added > capability: G.711-uLaw-64k{sw} <8> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1626) H323 Added > capability: G.711-ALaw-64k{sw} <9> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1687) H323 Found > capability: SpeexNarrow-5.95k{sw} <1> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1687) H323 Found > capability: SpeexNarrow-8k{sw} <2> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1687) H323 Found > capability: SpeexNarrow-11k{sw} <3> > 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1687) H323 Found > capability: SpeexNarrow-15k{sw} <4> > 0:26.031 H225 Answer:40419ae0 h323caps.cxx(1687) H323 Found > capability: SpeexNarrow-18.2k{sw} <5> > 0:26.031 H225 Answer:40419ae0 h323caps.cxx(1687) H323 Found > capability: G.723.1{sw} <6> > 0:26.031 H225 Answer:40419ae0 h323caps.cxx(1687) H323 Found > capability: GSM-06.10{sw} <7> > 0:26.031 H225 Answer:40419ae0 h323caps.cxx(1687) H323 Found > capability: G.711-uLaw-64k{sw} <8> > 0:26.031 H225 Answer:40419ae0 h323caps.cxx(1687) H323 Found > capability: G.711-ALaw-64k{sw} <9> > 0:26.031 H225 Answer:40419ae0 rfc2833.cxx(78) RFC2833 Handler > created > 0:26.031 H225 Answer:40419ae0 h323ep.cxx(1855) H323 Created new > connection: ip$XXX.XXX.XXX.251:1094/32 > 0:26.031 H225 Answer:40419ae0 h323.cxx(1619) H225 Handling > PDU: Setup callRef=32 > exten b4: ip$XXX.XXX.XXX.252:1720 > -- Executing Wait("H323/ip$XXX.XXX.XXX.251:1094/32", "1") in new stack > -- Executing Wait("H323/ip$XXX.XXX.XXX.251:1094/32", "1") in new stack > 0:26.042 H225 Answer:40419ae0 h323.cxx(1879) H225 Set protocol > version to 2 and implying H.245 version 3 > 0:26.043 H225 Answer:40419ae0 h323.cxx(2079) H225 Set remote > application name: "Sagitta IP-Phone 1.0 181/1234" > 0:26.043 H225 Answer:40419ae0 h323.cxx(1919) H225 Sending call > proceeding PDU > 0:26.044 H225 Answer:40419ae0 h323pdu.cxx(474) H225 Sending PDU: > callProceeding > 0:26.046 H225 Answer:40419ae0 h323.cxx(1949) H225 Incoming > call accepted > -- Executing Answer("H323/ip$XXX.XXX.XXX.251:1094/32", "") in new stack > 0:36.040 H225 Answer:40419ae0 transports.cxx(1525) H323TCP Could not > connect to XXX.XXX.XXX.251:1095 (local port=0) - Connection timed out(110) > 0:36.040 H225 Answer:40419ae0 h323.cxx(3057) H225 Connect of > H245 failed: Connection timed out > 0:36.041 H225 Answer:40419ae0 h323ep.cxx(1536) H323 Clearing > connection ip$XXX.XXX.XXX.251:1094/32 reason=EndedByTransportFail > 0:36.041 H225 Answer:40419ae0 h323.cxx(1403) H323 Call end > reason for ip$XXX.XXX.XXX.251:1094/32 set to EndedByTransportFail > 0:36.041 H225 Answer:40419ae0 h323.cxx(1421) H225 Sending > release complete PDU: callRef=32 > 0:36.042 H225 Answer:40419ae0 h323pdu.cxx(474) H225 Sending PDU: > releaseComplete > 0:36.042 H225 Answer:40419ae0 transports.cxx(1023) H225 Signal > channel stopped on first PDU. > 0:36.043 H323 Cleaner h323ep.cxx(1594) H323 Cleaning up > connections > 0:36.043 H323 Cleaner h323.cxx(1458) H323 Connection > ip$XXX.XXX.XXX.251:1094/32 closing: connectionState=NoConnectionActive > 0:36.043 H323 Cleaner transports.cxx(966) H323 > H323Transport::Close > 0:36.044 H323 Cleaner transports.cxx(1048) H323 > H323Transport::CleanUpOnTermination for H225 Answer:40419ae0 > 0:36.044 H323 Cleaner h323.cxx(1518) H323 Connection > ip$XXX.XXX.XXX.251:1094/32 terminated. > No connection found for ip$XXX.XXX.XXX.251:1094/32 > == Spawn extension (default, s, 2) exited non-zero on > 'H323/ip$XXX.XXX.XXX.251:1094/32' > 0:36.051 H323 Cleaner h323.cxx(1353) H323 Connection > ip$XXX.XXX.XXX.251:1094/32 deleted. > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users