Daniel, we have the same problem when our PRI line drops and Zapras has to reconnect. You will also notice that the pppd process does not die when Zapras does and the ppp connection cannot re-establish itself. What we normally do is restart asterisk and then kill the pppd process with the command: killall -9 pppd. How much of your resources does the pppd process take up when Zapras executes? Maybe try making pppd a lower priority than asterisk. Double check your configuration and make sure that you've done all that you needed to in order to properly setup zapras. go to digiums website and look at documentation.
On 6/22/05, Daniel Nyström <[EMAIL PROTECTED]> wrote: > I'm trying to use ZapRAS to enable ppp connection through my E1. > After the ZapRAS command is executed, all sound is crappy on all lines! > The only solution is to reboot the machine (or halt it, and then power > it on since Digium's hardware doesn't like reboots). > Anyone know how this can happen?! > I'm using * 1.0.6 on Dell PowerEdge 1850 which are told (too late > though) not to work very well, but should that really be the problem > with ZapRAS?! > -- > Daniel > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
