I finally received a phone call from Silicon Labs. They left a voice mail saying they were going to email me a data sheet for Si3210. I have not received it yet. As soon as I do and I get a little free time I will kick the chip around a little and try to narrow down the problem.
A few questions:
1. Has anyone received a new (since sept 1) tdm400p card that works?
2. Why isn't digium looking into this?
OK. Now it is time for me to go back to my full time job of trying to find a job.
Azher Amin wrote:
Hi,
I have received a new card TDM400P revision E, from digium. When I tried to modprobe wcfxs it gave me the following errors:
Freshmaker version: 63
Freshmaker passed register test
ProSLIC on module 0 insane (1) 255 should be 2
Module 0: Not installed
ProSLIC on module 1 insane (1) 255 should be 2
Module 1: Not installed
ProSLIC on module 2 insane (1) 255 should be 2
Module 2: Not installed
ProSLIC on module 3 insane (1) 0 should be 2
Module 3: Not installed
/lib/modules/2.4.20-8/misc/wcfxs.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-8/misc/wcfxs.o: insmod /lib/modules/2.4.20-8/misc/wcfxs.o failed
/lib/modules/2.4.20-8/misc/wcfxs.o: insmod wcfxs failed
I have another TDM400P revision C (few months older) which works perfectly on the same slot of the system. The machine is AMD750 and I have tested several other cards and they worked fine.
Plz suggest me about this problem and how to correct it.
Regards
Azher
------------------------------------------------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder <http://us.rd.yahoo.com/evt=10469/*http://sitebuilder.yahoo.com> - Free, easy-to-use web site design software
-- Bob Knight [-w] the work option [EMAIL PROTECTED] 925-449-9163
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
