I have the same problem in a box with 2 HFC-PCI, but i already remove the row
in modprobe.conf and load the module manually.
Both cards works fine
Any idea ?
Giordano
-----Messaggio originale-----
Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di Julian J. M.
Inviato: lunedì 27 giugno 2005 12.04
A: Asterisk Users Mailing List - Non-Commercial Discussion
Oggetto: Re: [Asterisk-Users] zaphfc: empty HDLC frame or bad CRC received
I had a similar problem with a recent install:
* TDM11B
* 1 Port HFC Card
I got that messages about HDLC Framing errors. It ended up being the way I
loaded the required kernel modules.
1) Remove or comment "install" lines in /etc/modprobe.conf (or modules.conf),
regarding the kernel modules for the TDM and the HFC Card. They usually launch
ztcfg.
2) In the init script, load both modules manually (modprobe wcfxs zaphfc)
3) Issue the ztcfg command
4) Load asterisk
That way it worked without problems.
Julian J. M.
On 6/27/05, David Masure <[EMAIL PROTECTED]> wrote:
>
>
> Hi all,
>
> I'm using asterisk 1.0.6 with bristuff-0.2.0-rc7k. I've already set
> up 3 boxes with the same config, but I'm facing something strange with
> the fourth one :
>
> In my messages log, I've got thoses lines :
>
> 0xff).
> kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 13,
> stat = 0xff).
> kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 11,
> stat = 0xff).
> kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6,
> stat = 0xff).
>
> This problem causes asterisk to crash... The only thing to do is a
> nice reboot :-)
>
> I read some informations about it in the list telling that's because
> of a wrong signalling type... But as, I am using the same config
> everywhere, I don't believe the problem is on the box ...
>
> Questions ....
>
> 1) The asterisk box is located in France...so could this be that the
> telco (France Telecom) is powering it's lines with different
> signalling (for example mutli point and point to point ?)
>
> 2) Does anyone ever face the same problem ?
>
> 3) Does someone know how to cope with this problem ?
>
> Thanks for your help ...I'm really don't know what to do ....!!!
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
