some times when the zap card share IRQ whit other device spansdp fail.
On 6/30/05, Bob Goddard <[EMAIL PROTECTED]> wrote:
I've a stock RH9 system with spandsp 0.18. Faxing out over a PRI to a
USRobotics modem on a stock Suse9.3 system with hylafax fails with the
following errors in the hylafax logs:
Jun 30 19:28:53.23: [ 608]: RECV/CQ: Bad 1D pixel count, row 0, got 595, expected 1728
Jun 30 19:28:53.23: [ 608]: RECV/CQ: Bad 1D pixel count, row 1, got 595, expected 1728
Jun 30 19:28:53.23: [ 608]: RECV/CQ: Bad 1D pixel count, row 2, got 595, expected 1728
etc...
I'm using the following call file as a test:
Channel: Zap/g1/XXXXXXXXXX
MaxRetries: 0
WaitTime: 20
Application: txfax
Data: /root/t.tif|caller
The * console does not give any useful info even when the verbose
setting is on max.
The tiff file in question does not seem to be a problem is it is a
2 page file which is viewable just fine with xv.
Does anyone have any clue as to what is wrong? It fails even if I
set it up such that it dials out then back in on itself.
B
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
David Romero
##################################
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
