Try two different entries:
sip.conf:
[general]
;disallow=gsm
;allow=ulaw
port = 5060 ; Port to bind to
bindaddr = 0.0.0.0 ; Address to bind to
context = default ; Default for incoming calls
callerid=No CallID
register => user:[EMAIL PROTECTED]/2025551212
[2025551212]
type=peer
realm=sipprovider.com
fromdomain=sipprovider.com
username=user
fromuser=user
secret=password
host=sipprovider.com
dtmfmode=inband
[sip_provider]
type=peer
context=sip_provider-inbound
host=sipprovider.com
extensions.conf:
[sip_provider-inbound]
exten => 2025551212,n,Goto(default,s,1)
exten => i,1,Goto(default,s,1)
exten => t,1,Goto(default,s,1)
exten => h,1,hangup
David wrote:
Hi,
I have been trying to configure my Asterisk to use a Sip provider for
out and incoming calls.
I only have one user and password for connect to my sip provider.
My sip.conf is:
[general]
;disallow=gsm
;allow=ulaw
port = 5060 ; Port to bind to
bindaddr = 0.0.0.0 ; Address to bind to
context = default ; Default for incoming calls
callerid=No CallID
register => user:[EMAIL PROTECTED]
[sip_proxy]
type=friend
username=user
fromuser=user
secret=password
host=siprovider
dtmfmode=inband
The problem is:
If i put in the [sip_proxy] section type=friend, incoming calls
doesn't works. If the type is set to another value (for example peer)
incoming calls works fine, but outgoing calls doesn't works.
What can I do?
Thanks
David
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
