The timing is provided by Zaptel, if you don't have that there is no timing.
So, after we get the registration, the next step is get the TDMoE working, if not you cannot generate any calls. If I confuse you, I'm sorry but was trying to help not to make you loose. I don't use ztdummy but you should request more info in that direction to finish this. Regards, Carlos -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Zoltan Szecsei Sent: Friday, July 08, 2005 1:43 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] IAXphone -> ip address -> extension number. Carlos Alperin wrote: >Ok, > >Now you get registration, but still you cannot complete the call. > >I don't see your dialplan on your files. However, the error log shows that >ztdummy is not working, so there is no timming. > >Lsmod shows the module already installed? > > >Carlos > > I did have it on a previous post, but here again: (note I have no special HW so I did not modprobe zapte before modprobe ztdummy - not sure if that is relevant or not) gl0:/home/zls # modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 142: Unable to open master device '/dev/zap/ctl' gl0:/home/zls # gl0:/home/zls # lsmod | grep z Module Size Used by ztdummy 7744 0 zaptel 239620 1 ztdummy crc_ccitt 6144 1 zaptel gl0:/home/zls # ***** extensions.conf ***************** [general] static=yes writeprotect=no [globals] CONSOLE=Console/dsp ; Console interface for demo IAXINFO=guest ; IAXtel username/password TRUNK=Zap/g2 ; Trunk interface TRUNKMSD=1 ; MSD digits to strip (usually 1 or 0) [geograph] exten => s,1,Answer() exten => s,2,Playback(goodbye) exten => s,3,Hangup() exten => 201,1,Dial(IAX/z1,20,tr) exten => 202,1,Dial(IAX/z2,20,tr) exten => 1201,1,Dial(IAX/z1,20,tr) exten => 1202,1,Dial(IAX/z2,20,tr) *********************************** ************ /var/log/messages ********** Jul 8 19:40:03 WARNING[6707]: Unable to open pseudo channel for timing... Sound may be choppy. Jul 8 19:40:03 WARNING[6707]: Unable to open IAX timing interface: No such file or directory Jul 8 19:40:03 NOTICE[6707]: Unable to load config sip.conf, SIP disabled Jul 8 19:40:03 WARNING[6707]: Read error on sound device: Resource temporarily unavailable Jul 8 19:40:03 WARNING[6707]: Unable to get our IP address, Skinny disabled *********************************** _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users