Thanks, Now I know that I don't need to change my name & address. (Joke)
My only concern was to be sure that every device is seen each other. I only use IAX2 for trunks between servers, which pretty good, however I hear every kind of argues about why I shouldn't use. But for me, it never worked if I don't define first the right hosts. (I have my servers, half in Michigan, the others are in Texas & Florida) Zoltan's problem looks more to be a timing issue, just he is not using Zaptel but ztdummy modules that are not loading. Regards, Carlos -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Adamson Sent: Friday, July 08, 2005 3:49 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] IAXphone -> ip address -> extension number. No one is going to hang you, Carlos. Trying sip probably isn't a bad idea at all, but that effort still wouldn't resolve the iax issue. ;) ------------------------ > If I write try with sip, everybody will try to hang me in the highest tree. > > So, If was on your position, I'll try SIP. > > I'm trying to help, no to argue with anyone, and of course not to dissinform > or missinterpretate anything. Just help. > > Regards, > > Carlos > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Zoltan Szecsei > Sent: Friday, July 08, 2005 12:54 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] IAXphone -> ip address -> extension number. > > Rich Adamson wrote: > > > The iax2 show peers is indicating the phone is not registering > >properly. (If the phone "never" changes IP addresses ever, then he > >"could" put a host= statement in the iax.conf, but that is very > >non-standard and will only serve to confuse people.) > > > > > In my reply to "time bandits" suggestion, that is exactly what I did and > "iax2 show peers" now shows the IP address. > > *but* I still cannot dial anywhere. > > What you have insinuated in your comment is that Asterisk and the phone > should have automatically sorted themselves out and because this is not > happening, my problem is elsewhere - proven by the fact that I have > hardcoded host=192.168.0.201 in the iax.conf file (whereas before I used > to have host=dynamic) and it still does not work. > > Possibilities: > 1) The iax timing error when I load asterisk (see reply to time bandit) > > 2) The phone itself. They are 2 new Advantage Century Telecomms Corp > AC-104ALDU units which I bought because they were both SIP and IAX > compatible. No documentation came with them and on the web page I could > only find SLD specs, not model ALDU specs. Hmmmmm - I wonder how good > that IAX claim is..... > > http://www.act-tel.com.tw/_UpLoad/Pic/P104S-Spec.pdf > > > Any suggestions how I should proceed? > > TIA, > Zoltan _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users