hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what I've done:
- Platform is Debian Woody/Stable - Asterisk is fresh from CVS, and so is chan_h323 - chan_h323 did compile, but also died from a rather nasty SIGSEGV (reported earlier) with Open H.323 v1.11.7 and PWLib v1.4.11. I checked them out from CVS instead after being adviced so by diana (on irc), and it now loads into memory without any fuzz. - Several people have told me chan_capi can work as a gatekeeper, so there should be no use for gnugk or any others. I have yet to find where this is hidden. FWICS, this is all commented out (ast_h323.cpp line 722). Is this right or have I overseen anything? - If this cannot be done alone with chan_h323, I guess I need to use gnugk or something. Can someone help me out how these two should be configured to work together? Also - is it possible to run gnugk on the same host as asterisk? Thanks for all help Best regards Roy Sigurd Karlsbakk <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users