I have used the mayday2005 and easter2005-testing versions of the
chan_sccp driver for weeks on end making and receiving flawless calls
(in uLaw only) in an asterisk cvs that I think was from around february
of this year. A lot of the soft keys weren't implemented, but the main
calling features seemed to be amazing. With the latest * cvs, now,
those versions don't seem to be quite as stable, but I haven't had the
time to quantify the problems I'm having yet for a list post. no audio
from 7920->asterisk was the big one, but that of course could be due to
another problem, but I did get this all ironed out at one point. I
should try an old cvs again to figure it out.
On the newest chan_sccp changes posted to this list by Sergio, my phone
reboots ~20s after I disconnect a call by pressing the 'endcall' hard or
soft key. (This could be fixed in 0713 by Sergio, "modified the calls
hangup system (more stable)" -- I really want to test this to see if it
helps me.
In my experience, when I see the "Connecting to Callmanager 1" screen, I
had to restart asterisk to make it all better. and I mean that a
"restart now" didn't phase it; a kill -9 would be needed. I just
realized that this _might_ be because the 7920 is DoSing it with
connection requests and rebooting the phone very well could release *
for a bit... interesting.
Also in my experience, Asterisk masquerades as Callmanager 1, not 0. I
always see the following, but it could be my situation uniquely:
Connecting to Callmanager 0 (for like 4s)
Connecting to Callmanager 1 (for like 0.1s)
Registered to Callmanager 1 (0.1s)
Registered to Asterisk (0.1s)
Last but not least, with all of Sergio's recent patches, most of
onscreen softkeys have a Euro mark instead of the button name. Not
having my phone with me I can't be sure which ones, but I think Mute and
Hold show text and all the rest show Euros.
Love the zeal you're attacking this with, Sergio! Thanks for every bit ;)
Mojo
Armin Lediger wrote:
Hi,
I´ve been following some information about the latest
chan_sccp drivers for a few weeks. I installed and tried
about any variant of driver that exists in the chan_sccp system.
Despite a few little changes in the CLI options I am still
encountering a lot of problems with the phone.
When not using the phone for a while, it "disconnects" from
asterisk (1.0.7) after a few hours and tells on the display
"connecting to callmanager1" so it seems like it is ignoring
the settings for callmanager0 (=asterisk box). Then I have to
restart the phone to get a connection to asterisk.
Is there anybody out there who has successfully worked with
the 7920 phone for longer than a few days and who has some
hints on adapting the functionality of the chan_sccp driver
to this phone in order to get a stable connection between
phone and asterisk.
Best regards,
Armin Lediger
--
HotZone GmbH Würzburg - schnurlos glücklich!
WLAN und VoIP Dienstleistungen
Arndtstr. 5
97072 Würzburg
[EMAIL PROTECTED]
Voice 0931-2056064
Fax 0931-2056063
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
