Can we assume the following?
1. You have eliminated the possibility of a card fault (i.e. tested all ports on all cards in both a single and a dual configuration)
2. you have confirmed the support of the MB for PCI 2.2 in all slots
3. You have removed any other cards in the bus (that it is possible and practical to do)
4. you have eliminated any interrupt conflicts
5. Config and drivers are all set up correctly.
It might also be of help to post the output of ztcfg -d 255 -vv
cheers,
Mark
On 7/16/05, Chris Gamble <[EMAIL PROTECTED]> wrote:
I have seen various other problems with the cards not detected, but I seem to suffer a different fate. The system boots and recognizes fine, but when I call in from an external line, all I hear is a horrible static. The system works fine when only 1 card is present. I have already moved the new card to a different pci slot. Any suggestions on what I have done?
THanks,
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
regards,
Mark P. Edwards
FWD: 667917
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
