I actually had the same problem for a while. It would stop registering or it would say something about register timeout.

I have made two changes that have successfully resolve this issue for more then a week now.

I have added nat = yes in sip.conf under broadvoice peer section and I have started using ntp on the asterisk machine ntp.nasa.gov

This solved my problems. I actually have two lines registered with them.

Hope that helps.

Thanks,

Yoni.

On 7/19/05, JD Austin <[EMAIL PROTECTED]> wrote:


Joe McConnaughey wrote:
Hello -
 
I've been using Broadvoice with Asterisk for a couple of months with no issues.  Today, it has stopped registering.  The Sip Debug from CLI is below.  It tries to register five times and then gives up.  Any suggestions?  As you might suspect, I have not been able to get Broadvoice on the phone and usually get cut off after being on hold about 5 minutes. 
 
I would be VERY surprised if it was your setup that was the issue. 
I recently dumped them as a provider after several months of 'iffy' service.
 
Check their BOYD setup page for asterisk in case they've changed something there,
other than that crossing your fingers will do as much good as trying to contact them.

JD
-- 
JD Austin
Twin Geckos Technology Services LLC
email: [EMAIL PROTECTED]
http://www.twingeckos.com
phone/fax: 480.288.8195




_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users




--
http://cigan1.smugmug.com/
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to