Paul Hewlett wrote:
On Wednesday 20 July 2005 15:49, Angus Comber wrote:
Hello
I see it is possible to buy Flash Disks up to 4GB now. Has anyone any
experience of building an Asterisk system with a flash disk as the only
storage device? Any brands you recommend? Is 2 or 4GB enough for an
Asterisk installation? Typically how many MB is required for voicemail
recording files for say a 10 user system? What about voicemail - I suppose
files could be emailed and deleted immediately?
I have been using flash-based asterisk and it works fine as long as you are
careful about the maker - SanDisk did not work properly, we currently use the
RiData flash disk and are happy with it. I have a Kingston Tech flash disk
that was flaky and finally failed yesterday.
They are not the fastest - running hdparm -tT on them reveals a speed of 2Mb/s
which is about a third of the speed of 100Mbits ethernet. For call recording
I usually add an IDE hard drive and make sure that most filesystems
(e.g. /var,/tmp..) are loaded into a RAM disk
Paul Hewlett
Paul,
SanDisk CF cards are often considered to be the best around. What
problems were you having?
CF is both slow and fast. Seek times are very low, but sustained data
transfer rates are not very good (ESPECIALLY for writes). 2Mb/s is
actually more like 1/4 - 1/5 the speed of 100mbps ethernet...
Are you aware that I have created a distro specifically for running
Asterisk from compact flash? Perhaps you should take a look:
http://www.astlinux.org
--
Kristian Kielhofner
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
