Sorry about the late post, but you can also use a console cable to reset the
password.
----- Original Message -----
From: "Shaun Ewing" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "Asterisk Users Mailing List - Non-Commercial
Discussion" <asterisk-users@lists.digium.com>
Sent: Thursday, July 21, 2005 6:51 PM
Subject: Re: [Asterisk-Users] Semi-Ot - Cisco IP Phone Password Reset
Procedure
On 7/22/05, Cory Andrews <[EMAIL PROTECTED]> wrote:
Has anyone come up with a way to reset the password on a Cisco IP Phone
when the normal password reset procedure does not work? I have some
phones that are running MGCP, and the password for the phone was
assigned in the original config file TFTP'd to the phone.
Can you TFTP a new configuration to the phone?
If it's using DHCP and doesn't have a TFTP server explicitly defined
(and you have a DHCP server that supports it), you can send the phone
a TFTP server address using DHCP options 66 and 150.
-Shaun
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
