Go into the CLI on the box and type: sip show users sip show peers Did you get two lists? One that shows the sip accounts and the other that shows the registered sip accounts?
What does this show in the CLI: zap show channels W -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim King Sent: Tuesday, August 02, 2005 2:54 PM To: [EMAIL PROTECTED]; 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: Re: [Asterisk-Users] WHat does it take The busy extensions are from dialing any local extensions from one to another. I cant seem to post the configs because I used asterisk at home and the post becomes too big. I have ZAP and SIP extensions configured and no matter what they always transfer straight to voicemail. Extensions.conf ; Asterisk Management Portal (AMP) ; Copyright (C) 2004 Coalescent Systems Inc ; dialparties.agi (http://www.sprackett.com/asterisk/) ; Asterisk::AGI (http://asterisk.gnuinter.net/) ; gsm (http://www.ibiblio.org/pub/Linux/utils/compress/!INDEX.short.html) ; loligo sounds (http://www.loligo.com/asterisk/sounds/) ; mpg123 (http://voip-info.org/wiki-Asterisk+config+musiconhold.conf) ; include extension contexts generated from AMP #include extensions_additional.conf ; Customizations to this dialplan should be made in extensions_custom.conf ; See extensions_custom.conf.sample for an example #include extensions_custom.conf [from-trunk] ; just an alias since VoIP shouldn't be called PSTN include => from-pstn [from-pstn] include => from-pstn-custom ; create this context in extensions_custom.conf to include customizations include => ext-did include => from-pstn-timecheck ; this has to be included otherwise it overrides ext-did [from-pstn-timecheck] exten => .,1,Goto(s,1) ; catch-all matching for calls that have DID info (if a DID route hasn't matched them) exten => s,1,GotoIf($[${IN_OVERRIDE} = forcereghours]?from-pstn-reghours,s,1:) exten => s,2,GotoIf($[${IN_OVERRIDE} = forceafthours]?from-pstn-afthours,s,1:) exten => s,3,GotoIfTime(${REGTIME}|${REGDAYS}|*|*?from-pstn-reghours,s,1:) exten => s,4,Goto(from-pstn-afthours,s,1) [from-pstn-reghours] exten => s,1,GotoIf($[${FAX_RX} = disabled]?from-pstn-reghours-nofax,s,1:2) ; if fax detection is disabled, then jump to from-pstn-nofax - else continue exten => s,2,Answer exten => s,3,Wait(1) exten => s,4,SetVar(intype=${INCOMING}) exten => s,5,Cut(intype=intype,-,1) exten => s,6,GotoIf($[${intype} = EXT]?7:9) ; If INCOMING starts with EXT, then assume its an extension exten => s,7,Wait(3) ;wait 3 more second to make sure this isn't a fax before dialing someone exten => s,8,Goto(ext-local,${INCOMING:4},1) exten => s,9,GotoIf($[${intype} = GRP]?10:12) ; If INCOMING starts with GRP, then assume its a ring group exten => s,10,Wait(3) exten => s,11,Goto(ext-group,${INCOMING:4},1) exten => s,12,GotoIf($[${intype} = QUE]?13:15) exten => s,13,Wait(3) exten => s,14,Goto(ext-queues,${INCOMING:4},1) exten => s,15,Goto(${INCOMING},s,1) ; not EXT or GR1 - it's an auto attendant exten => fax,1,Goto(ext-fax,in_fax,1) exten => h,1,Hangup [from-pstn-reghours-nofax] exten => s,1,SetVar(intype=${INCOMING}) exten => s,2,Cut(intype=intype,-,1) exten => s,3,GotoIf($[${intype} = EXT]?4:5) ; If INCOMING starts with EXT, then assume its an extension exten => s,4,Goto(ext-local,${INCOMING:4},1) exten => s,5,GotoIf($[${intype} = GRP]?6:7) ; If INCOMING starts with GRP, then assume its a ring group exten => s,6,Goto(ext-group,${INCOMING:4},1) exten => s,7,GotoIf($[${intype} = QUE]?8:11) ;queue exten => s,8,Answer ; answer call before queue exten => s,9,Wait(1) exten => s,10,Goto(ext-queues,${INCOMING:4},1) exten => s,11,Answer ; answer call before auto attendant exten => s,12,Wait(1) exten => s,13,Goto(${INCOMING},s,1) ; not EXT or GR1 - it's an auto attendant exten => fax,1,Goto(ext-fax,in_fax,1) exten => h,1,Hangup [from-pstn-afthours] exten => s,1,GotoIf($[${FAX_RX} = disabled]?from-pstn-afthours-nofax,s,1:2) ; if fax detection is disabled, then jump to from-pstn-nofax - else continue exten => s,2,Answer exten => s,3,Wait(1) exten => s,4,SetVar(intype=${AFTER_INCOMING}) exten => s,5,Cut(intype=intype,-,1) exten => s,6,GotoIf($[${intype} = EXT]?7:9) ; If INCOMING starts with EXT, then assume its an extension exten => s,7,Wait(3) ;wait 3 more second to make sure this isn't a fax before dialing someone exten => s,8,Goto(ext-local,${AFTER_INCOMING:4},1) exten => s,9,GotoIf($[${intype} = GRP]?10:12) ; If INCOMING starts with GRP, then assume its a ring group exten => s,10,Wait(3) exten => s,11,Goto(ext-group,${AFTER_INCOMING:4},1) exten => s,12,GotoIf($[${intype} = QUE]?13:15) exten => s,13,Wait(3) exten => s,14,Goto(ext-queues,${AFTER_INCOMING:4},1) exten => s,15,Goto(${AFTER_INCOMING},s,1) ; not EXT or GR1 - it's an auto attendant exten => fax,1,Goto(ext-fax,in_fax,1) exten => h,1,Hangup [from-pstn-afthours-nofax] exten => s,1,SetVar(intype=${AFTER_INCOMING}) exten => s,2,Cut(intype=intype,-,1) exten => s,3,GotoIf($[${intype} = EXT]?4:5) ; If INCOMING starts with EXT, then assume its an extension exten => s,4,Goto(ext-local,${AFTER_INCOMING:4},1) exten => s,5,GotoIf($[${intype} = GRP]?6:7) ; If INCOMING starts with GRP, then assume its a ring group exten => s,6,Goto(ext-group,${AFTER_INCOMING:4},1) exten => s,7,GotoIf($[${intype} = QUE]?8:11) ;queue exten => s,8,Answer ; answer call before queue exten => s,9,Wait(1) exten => s,10,Goto(ext-queues,${AFTER_INCOMING:4},1) exten => s,11,Answer ; answer call before auto attendant exten => s,12,Wait(1) exten => s,13,Goto(${AFTER_INCOMING},s,1) ; not EXT or GR1 - it's an auto attendant exten => fax,1,Goto(ext-fax,in_fax,1) exten => h,1,Hangup ; ######################################################################## #### ; Macros [macro] ; ######################################################################## #### ; Rings one or more extensions. Handles things like call forwarding and DND ; We don't call dial directly for anything internal anymore. ; ARGS: $TIMER, $OPTIONS, $EXT1, $EXT2, $EXT3, ... ; Use a Macro call such as the following: ; Macro(dial,$DIAL_TIMER,$DIAL_OPTIONS,$EXT1,$EXT2,$EXT3,...) [macro-dial] exten => s,1,GotoIf($[ "${MACRO_CONTEXT}" = "macro-rg-group" ]?4:2) ; if this is from rg-group, don't strip prefix exten => s,2,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} != ${RGPREFIX}]?4:3) ; check for ring-group prefix exten => s,3,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off prefix exten => s,4,AGI,dialparties.agi exten => s,5,NoOp(Returned from dialparties with no extensions to call) exten => s,6,SetVar(DIALSTATUS=BUSY) exten => s,10,Dial(${ds}) ; dialparties will set the priority to 10 if $ds is not null ; Ring an extension, if the extension is busy or there is no answer send it ; to voicemail ; ARGS: $VMBOX, $EXT [macro-exten-vm] exten => s,1,Setvar(FROMCONTEXT=exten-vm) exten => s,2,Macro(record-enable,${ARG2},IN) exten => s,3,Macro(dial,${RINGTIMER},${DIAL_OPTIONS},${ARG2}) exten => s,4,GotoIf($[${CHANNEL:0:5} = Local]?s-${DIALSTATUS},1) ; if the channel is Local, then do not go to voicemail. This is primarily to avoid vm for call-forwarded extensions in ring groups exten => s,5,GotoIf($[${ARG1} = novm]?s-${DIALSTATUS},1) ; no voicemail in use for this extension exten => s,6,NoOp(Sending to Voicemail box ${ARG1}) exten => s,7,Macro(vm,${ARG1},${DIALSTATUS}) exten => s-BUSY,1,NoOp(Extension is reporting BUSY and has no Voicemail) exten => s-BUSY,2,Busy() exten => s-BUSY,3,Wait(60) exten => s-BUSY,4,NoOp() exten => _s-.,1,Congestion() [macro-vm] exten => s,1,Goto(s-${ARG2},1) exten => s-BUSY,1,Voicemail(b${ARG1}) ; Voicemail Busy message exten => s-BUSY,2,Hangup() exten => _s-.,1,Voicemail(u${ARG1}) ; Voicemail Unavailable message exten => _s-.,2,Hangup() exten => o,1,Background(one-moment-please) ; 0 during vm message will hangup exten => o,2,GotoIf($["foo${FROM_DID}" = "foo"]?from-pstn,s,1:from-pstn,${FROM_DID},1) exten => a,1,VoiceMailMain(${ARG1}) exten => a,2,Hangup ; For some reason, if I don't run setCIDname, CALLERIDNAME will be blank in my AGI ; ARGS: none [macro-fixcid] exten => s,1,SetCIDName(${CALLERIDNAME}) ; Ring groups of phones ; ARGS: comma separated extension list ; 1 - ringtimer ; 2 - preifx ; 3 - extension list [macro-rg-group] exten => s,1,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} != ${RGPREFIX}]?3:2) ; check for old prefix exten => s,2,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off old prefix exten => s,3,Setvar(RGPREFIX=${ARG2}) ; set new prefix exten => s,4,SetCIDName(${RGPREFIX}${CALLERIDNAME}) ; add prefix to callerid name exten => s,5,Setvar(RecordMethod=Group) ; set new prefix exten => s,6,Macro(record-enable,${MACRO_EXTEN},${RecordMethod}) exten => s,7,Macro(dial,${ARG1},${DIAL_OPTIONS},${ARG3}) ;exten => s,1,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} != ${RGPREFIX}]?3:2) ; check for old prefix ;exten => s,2,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off old prefix ;exten => s,3,Setvar(RGPREFIX=${ARG2}) ; set new prefix ;;exten => s,4,Noop(${RGPREFIX} ${CALLERIDNAME}) ;exten => s,4,SetCIDName(${RGPREFIX}${CALLERIDNAME}) ; add prefix to callerid name ;;exten => s,6,Noop(Dial group ${ARG3}) ;exten => s,5,Macro(dial,${ARG1},${DIAL_OPTIONS},${ARG3}) ;exten => s,1,Setvar(GRP=${GRP}) ;my original choice of variable GROUP is now overwritten by SetGroup. Copy contents to GRP ;exten => s,2,SetGroup(${CALLERIDNUM}) ;exten => s,3,Setvar(FROMCONTEXT=rg-group) ;exten => s,4,SetCIDName(${PRE}${CALLERIDNAME}) ;exten => s,5,Macro(dial,${RINGTIMER},${DIAL_OPTIONS},${GRP}) ; ; Outgoing channel(s) are busy ... inform the client ; [macro-outisbusy] exten => s,1,Playback(allison7/all-circuits-busy-now) exten => s,2,Playback(allison7/pls-try-call-later) exten => s,3,Macro(hangupcall) ; What to do on hangup. [macro-hangupcall] exten => s,1,ResetCDR(w) exten => s,2,NoCDR() exten => s,3,Wait(5) exten => s,4,Hangup [macro-faxreceive] exten => s,1,SetVar(FAXFILE=/var/spool/asterisk/fax/${UNIQUEID}.tif) exten => s,2,SetVar(EMAILADDR=${FAX_RX_EMAIL}) exten => s,3,rxfax(${FAXFILE}) exten => s,103,SetVar(EMAILADDR=${FAX_RX_EMAIL}) exten => s,104,Goto(3) ; dialout and strip the prefix [macro-dialout] exten => s,1,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?4) ;check for CID override for exten exten => s,2,SetCallerID(${ECID${CALLERIDNUM}}) exten => s,3,Goto(6) exten => s,4,GotoIf($[foo${OUTCID_${ARG1}} = foo]?6) ;check for CID override for trunk exten => s,5,SetCallerID(${OUTCID_${ARG1}}) exten => s,6,SetVar(length=${LEN(${DIAL_OUT_${ARG1}})}) exten => s,7,Dial(${OUT_${ARG1}}/${ARG2:${length}}) exten => s,8,Congestion exten => s,108,Macro(outisbusy) ; dialout using default OUT trunk - no prefix [macro-dialout-default] exten => s,1,Macro(record-enable,${CALLERIDNUM},OUT) exten => s,2,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?5) ;check for CID override for exten exten => s,3,SetCallerID(${ECID${CALLERIDNUM}}) exten => s,4,Goto(7) exten => s,5,GotoIf($[foo${OUTCID} = foo]?7) ;check for CID override for trunk exten => s,6,SetCallerID(${OUTCID}) exten => s,7,Dial(${OUT}/${ARG1}) exten => s,8,Congestion exten => s,108,Macro(outisbusy) ; dialout using a trunk, using pattern matching (don't strip any prefix) ; arg1 = trunk number, arg2 = number, arg3 = route password [macro-dialout-trunk] exten => s,1,GotoIf($[foo${ARG3} = foo]?3:2)) ; arg3 is pattern password exten => s,2,Authenticate(${ARG3}) exten => s,3,Macro(record-enable,${CALLERIDNUM},OUT) exten => s,4,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?7) ;check for CID override for exten exten => s,5,SetCallerID(${ECID${CALLERIDNUM}}) exten => s,6,Goto(9) exten => s,7,GotoIf($[foo${OUTCID_${ARG1}} = foo]?9) ;check for CID override for trunk exten => s,8,SetCallerID(${OUTCID_${ARG1}}) exten => s,9,SetGroup(OUT_${ARG1}) exten => s,10,CheckGroup(${OUTMAXCHANS_${ARG1}}) ; if we've used up the max channels, continue at 109 (n+101) exten => s,11,SetVar(DIAL_NUMBER=${ARG2}) exten => s,12,SetVar(DIAL_TRUNK=${ARG1}) exten => s,13,AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the proper dial string for this trunk exten => s,14,SetVar(OUTNUM=${OUTPREFIX_${ARG1}}${DIAL_NUMBER}) ; OUTNUM is the final dial number exten => s,15,Cut(custom=OUT_${ARG1},:,1) ; Custom trunks are prefixed with "AMP:" exten => s,16,GotoIf($[${custom} = AMP]?19) exten => s,17,Dial(${OUT_${ARG1}}/${OUTNUM}) ; Regular Trunk Dial exten => s,18,Goto(s-${DIALSTATUS},1) ; This is a custom trunk. Substitute $OUTNUM$ with the actual number and rebuild the dialstring ; example trunks: "AMP:CAPI/XXXXXXXX:b$OUTNUM$,30,r", "AMP:OH323/[EMAIL PROTECTED]:XXXX" exten => s,19,Cut(pre_num=OUT_${ARG1},$,1) exten => s,20,Cut(the_num=OUT_${ARG1},$,2) ; this is where we expect to find string OUTNUM exten => s,21,Cut(post_num=OUT_${ARG1},$,3) exten => s,22,GotoIf($[${the_num} = OUTNUM]?23:24) ; if we didn't find "OUTNUM", then skip to Dial exten => s,23,SetVar(the_num=${OUTNUM}) ; replace "OUTNUM" with the actual number to dial exten => s,24,Dial(${pre_num:4}${the_num}${post_num}) exten => s,25,Goto(s-${DIALSTATUS},1) exten => s,111,Noop(max channels used up) exten => s-BUSY,1,NoOp(Trunk is reporting BUSY) exten => s-BUSY,2,Busy() exten => s-BUSY,3,Wait(60) exten => s-BUSY,4,NoOp() exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS}) ; Adds a dynamic agent/member to a Queue ; Prompts for call-back number - in not entered, uses CIDNum [macro-agent-add] exten => s,1,Wait(1) exten => s,2,NoOp exten => s,3,Read(CALLBACKNUM,agent-user) ; get callback number from user exten => s,4,GotoIf($[foo${CALLBACKNUM} = foo]?5:7)) ; if user just pressed # or timed out, use cidnum exten => s,5,SetVar(CALLBACKNUM=${CALLERIDNUM}) exten => s,6,GotoIf($[foo${CALLBACKNUM} = foo]?2)) ; if still no number, start over exten => s,7,GotoIf($[foo${ARG2} = foo]?9:8)) ; arg2 is queue password exten => s,8,Authenticate(${ARG2}) exten => s,9,AddQueueMember(${ARG1}|Local/[EMAIL PROTECTED]) ; using chan_local allows us to have agents over trunks exten => s,10,Wait(1) exten => s,11,Playback(agent-loginok) exten => s,12,Hangup() ; Removes a dynamic agent/member from a Queue ; Prompts for call-back number - in not entered, uses CIDNum [macro-agent-del] exten => s,1,Wait(1) exten => s,2,NoOp exten => s,3,Read(CALLBACKNUM,agent-user) ; get callback number from user exten => s,4,GotoIf($[foo${CALLBACKNUM} = foo]?5:7)) ; if user just pressed # or timed out, use cidnum exten => s,5,SetVar(CALLBACKNUM=${CALLERIDNUM}) exten => s,6,GotoIf($[foo${CALLBACKNUM} = foo]?2)) ; if still no number, start over exten => s,7,RemoveQueueMember(${ARG1}|Local/[EMAIL PROTECTED]) exten => s,8,Wait(1) exten => s,9,Playback(agent-loggedoff) exten => s,10,Hangup() ; arg1 = trunk number, arg2 = number [macro-dialout-enum] exten => s,1,Macro(record-enable,${CALLERIDNUM},OUT) exten => s,2,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?3) ;check for CID override for exten exten => s,3,SetCallerID(${ECID${CALLERIDNUM}}) exten => s,4,Goto(7) exten => s,5,GotoIf($[foo${OUTCID_${ARG1}} = foo]?7) ;check for CID override for trunk exten => s,6,SetCallerID(${OUTCID_${ARG1}}) exten => s,7,SetGroup(OUT_${ARG1}) exten => s,8,CheckGroup(${OUTMAXCHANS_${ARG1}}) ; if we've used up the max channels, continue at 108 (n+101) exten => s,9,SetVar(DIAL_NUMBER=${ARG2}) exten => s,10,SetVar(DIAL_TRUNK=${ARG1}) exten => s,11,AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the proper dial string for this trunk exten => s,12,EnumLookup(${DIAL_NUMBER}) exten => s,13,GotoIf($[$[${ENUM:0:3} = SIP] | $[${ENUM:0:3} = IAX]]?14:63) exten => s,14,Dial(${ENUM}) exten => s,15,Goto(s-${DIALSTATUS},1) ; if dial fails (ie, all channels are busy), continue at 116 (n+101) ; exit points for macro exten => s,63,NoOp(EnumLookup failed) exten => s,109,NoOp(max channels used up) exten => s-BUSY,1,NoOp(Trunk is reporting BUSY) exten => s-BUSY,2,Busy() exten => s-BUSY,3,Wait(60) exten => s-BUSY,4,NoOp() exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS}) [macro-record-enable] exten => s,1,GotoIf(${LEN(${BLINDTRANSFER})} > 0?2:4) exten => s,2,ResetCDR(w) exten => s,3,StopMonitor() exten => s,4,GotoIf($["${ARG2}" = "OUT"]?5:8) exten => s,5,DBGet(RecEnable=RECORD-OUT/${ARG1}) exten => s,6,SetVar(CALLFILENAME=OUT${ARG1}-${TIMESTAMP}-${UNIQUEID}) exten => s,7,Goto(s,14) exten => s,8,GotoIf($["${ARG2}" = "Group"]?9:12) exten => s,9,AGI(recordingcheck) exten => s,10,SetVar(CALLFILENAME=g${ARG1}-${TIMESTAMP}-${UNIQUEID}) exten => s,11,Goto(s,14) exten => s,12,DBGet(RecEnable=RECORD-IN/${ARG1}) exten => s,13,SetVar(CALLFILENAME=${TIMESTAMP}-${UNIQUEID}) exten => s,14,GotoIf($["${RecEnable}" = "ENABLED"]?15:99) exten => s,15,Monitor(wav49,${CALLFILENAME}, mb) exten => s,99,Noop(NO RECORDING NEEDED) ;exten => s,3,BackGround(for-quality-purposes) ;exten => s,4,BackGround(this-call-may-be) ;exten => s,5,BackGround(recorded) ; This macro is for dev purposes and just dumps channel/app variables. Useful when designing new contexts. [macro-dumpvars] exten => s,1,Noop(ACCOUNTCODE=${ACCOUNTCODE}) exten => s,2,Noop(ANSWEREDTIME=${ANSWEREDTIME}) exten => s,3,Noop(BLINDTRANSFER=${BLINDTRANSFER}) exten => s,4,Noop(CALLERID=${CALLERID}) exten => s,5,Noop(CALLERIDNAME=${CALLERIDNAME}) exten => s,6,Noop(CALLERIDNUM=${CALLERIDNUM}) exten => s,7,Noop(CALLINGPRES=${CALLINGPRES}) exten => s,8,Noop(CHANNEL=${CHANNEL}) exten => s,9,Noop(CONTEXT=${CONTEXT}) exten => s,10,Noop(DATETIME=${DATETIME}) exten => s,11,Noop(DIALEDPEERNAME=${DIALEDPEERNAME}) exten => s,12,Noop(DIALEDPEERNUMBER=${DIALEDPEERNUMBER}) exten => s,13,Noop(DIALEDTIME=${DIALEDTIME}) exten => s,14,Noop(DIALSTATUS=${DIALSTATUS}) exten => s,15,Noop(DNID=${DNID}) exten => s,16,Noop(EPOCH=${EPOCH}) exten => s,17,Noop(EXTEN=${EXTEN}) exten => s,18,Noop(HANGUPCAUSE=${HANGUPCAUSE}) exten => s,19,Noop(INVALID_EXTEN=${INVALID_EXTEN}) exten => s,20,Noop(LANGUAGE=${LANGUAGE}) exten => s,21,Noop(MEETMESECS=${MEETMESECS}) exten => s,22,Noop(PRIORITY=${PRIORITY}) exten => s,23,Noop(RDNIS=${RDNIS}) exten => s,24,Noop(SIPDOMAIN=${SIPDOMAIN}) exten => s,25,Noop(SIP_CODEC=${SIP_CODEC}) exten => s,26,Noop(SIPCALLID=${SIPCALLID}) exten => s,27,Noop(SIPUSERAGENT=${SIPUSERAGENT}) exten => s,28,Noop(TIMESTAMP=${TIMESTAMP}) exten => s,29,Noop(TXTCIDNAME=${TXTCIDNAME}) exten => s,30,Noop(UNIQUEID=${UNIQUEID}) exten => s,31,Noop(TOUCH_MONITOR=${TOUCH_MONITOR}) exten => s,32,Noop(MACRO_CONTEXT=${MACRO_CONTEXT}) exten => s,33,Noop(MACRO_EXTEN=${MACRO_EXTEN}) exten => s,34,Noop(MACRO_PRIORITY=${MACRO_PRIORITY}) ; ######################################################################## #### ; Applications [app] ; ######################################################################## #### ; [app-directory] ;DIR-CONTEXT set in Digital Receptionist exten => #,1,Wait(1) exten => #,2,AGI(directory,${DIR-CONTEXT},ext-local,${DIRECTORY:0:1}${DIRECTORY_O PTS} o) exten => #,3,Playback(vm-goodbye) exten => #,4,Hangup ; *411 will access the entire directory (not just a single context) exten => *411,1,Answer exten => *411,2,Wait(1) exten => *411,3,AGI(directory,general,ext-local,${DIRECTORY:0:1}${DIRECTORY_OPTS} ) exten => *411,4,Playback(vm-goodbye) exten => *411,5,Hangup exten => h,1,Hangup exten => o,1,GotoIf($["foo${FROM_DID}" = "foo"]?from-pstn,s,1:from-pstn,${FROM_DID},1) [app-dnd] exten => *78,1,Answer exten => *78,2,Wait(1) exten => *78,3,DBput(DND/${CALLERIDNUM}=YES) exten => *78,4,Playback(allison7/do-not-disturb) exten => *78,5,Playback(activated) exten => *78,6,Macro(hangupcall) exten => *79,1,Answer exten => *79,2,Wait(1) exten => *79,3,DBdel(DND/${CALLERIDNUM}) exten => *79,4,Playback(allison7/do-not-disturb) exten => *79,5,Playback(de-activated) exten => *79,6,Macro(hangupcall) [app-messagecenter] exten => *98,1,Answer exten => *98,2,Wait(1) exten => *98,3,VoiceMailMain(default) exten => *98,4,Macro(hangupcall) exten => _*98X.,1,Answer ; can dial *98<exten> to skip 'mailbox' prompt. Useful for speedial. exten => _*98X.,2,Wait(1) exten => _*98X.,3,VoiceMailMain(${EXTEN:[EMAIL PROTECTED]) exten => _*98X.,4,Macro(hangupcall) exten => *97,1,Answer exten => *97,2,Wait(1) exten => *97,3,VoicemailMain([EMAIL PROTECTED]) exten => *97,4,Macro(hangupcall) [app-callwaiting] exten => *70,1,Answer exten => *70,2,Wait(1) exten => *70,3,DBput(CW/${CALLERIDNUM}=ENABLED) exten => *70,4,Playback(callwaiting) exten => *70,5,Playback(activated) exten => *70,6,Macro(hangupcall) exten => *71,1,Answer exten => *71,2,Wait(1) exten => *71,3,DBdel(CW/${CALLERIDNUM}) exten => *71,4,Playback(callwaiting) exten => *71,5,Playback(de-activated) exten => *71,6,Macro(hangupcall) [app-callforward] ; dialed call forward app - forwards calling extension exten => _*72.,1,DBput(CF/${CALLERIDNUM}=${EXTEN:3}) exten => _*72.,2,Answer exten => _*72.,3,Wait(1) exten => _*72.,4,Playback(loligo/call-fwd-unconditional) exten => _*72.,5,Playback(loligo/for) exten => _*72.,6,Playback(loligo/extension) exten => _*72.,7,SayDigits(${CALLERIDNUM}) exten => _*72.,8,Playback(loligo/is-set-to) exten => _*72.,9,SayDigits(${EXTEN:3}) exten => _*72.,10,Macro(hangupcall) ; prompting call forward app - forwards entered extension exten => *72,1,Answer exten => *72,2,Wait(1) exten => *72,3,BackGround(allison7/please-enter-your) exten => *72,4,Playback(extension) exten => *72,5,Read(fromext,then-press-pound) exten => *72,6,Wait(1) exten => *72,7,BackGround(ent-target-attendant) exten => *72,8,Read(toext,then-press-pound) exten => *72,9,Wait(1) exten => *72,10,DBput(CF/${fromext}=${toext}) exten => *72,11,Playback(call-fwd-unconditional) exten => *72,12,Playback(for) exten => *72,13,Playback(extension) exten => *72,14,SayDigits(${fromext}) exten => *72,15,Playback(is-set-to) exten => *72,16,SayDigits(${toext}) exten => *72,17,Macro(hangupcall) ; cancels dialed extension call forward exten => _*73.,1,DBdel(CF/${EXTEN:3}) exten => _*73.,2,Answer exten => _*73.,3,Wait(1) exten => _*73.,4,SayDigits(${EXTEN:3}) exten => _*73.,5,Playback(call-fwd-cancelled) exten => _*73.,6,Macro(hangupcall) ; cancels call forward for calling extension exten => *73,1,DBdel(CF/${CALLERIDNUM}) exten => *73,2,Answer exten => *73,3,Wait(1) exten => *73,4,Playback(loligo/call-fwd-cancelled) exten => *73,5,Macro(hangupcall) ; dialed call forward on busy app - forwards calling extension when busy exten => _*90.,1,DBput(CFB/${CALLERIDNUM}=${EXTEN:3}) exten => _*90.,2,Answer exten => _*90.,3,Wait(1) exten => _*90.,4,Playback(loligo/call-fwd-on-busy) exten => _*90.,5,Playback(loligo/for) exten => _*90.,6,Playback(loligo/extension) exten => _*90.,7,SayDigits(${CALLERIDNUM}) exten => _*90.,8,Playback(loligo/is-set-to) exten => _*90.,9,SayDigits(${EXTEN:3}) exten => _*90.,10,Macro(hangupcall) ; cancels call forward on busy for calling extension exten => *91,1,DBdel(CFB/${CALLERIDNUM}) exten => *91,2,Answer exten => *91,3,Wait(1) exten => *91,4,Playback(call-fwd-on-busy) exten => *91,5,Playback(de-activated) exten => *91,6,Macro(hangupcall) exten => h,1,Hangup [app-calltrace] ; We can't have our timeouts or dial digits collide with other applications ; or extensions, so we build the app in pieces exten => *69,1,Goto(app-calltrace-perform,s,1) [app-calltrace-perform] exten => s,1,Answer exten => s,2,Wait(1) exten => s,3,Background(allison7/info-about-last-call) exten => s,4,Background(allison7/telephone-number) exten => s,5,Dbget(lastcaller=CALLTRACE/${CALLERIDNUM}) exten => s,6,GotoIf($[${lastcaller}]?7:13) exten => s,7,SayDigits(${lastcaller}) exten => s,8,DigitTimeout(3) exten => s,9,ResponseTimeout(7) exten => s,10,Background(loligo/to-call-this-number) exten => s,11,Background(allison7/press-1) exten => s,12,Goto(15) exten => s,13,Playback(loligo/from-unknown-caller) exten => s,14,Macro(hangupcall) exten => s,15,NoOp exten => 1,1,Goto(from-internal,${lastcaller},1); exten => i,1,Playback(vm-goodbye) exten => i,2,Macro(hangupcall) exten => t,1,Playback(vm-goodbye) exten => t,2,Macro(hangupcall) ; ######################################################################## #### ; Inbound Contexts [from] ; ######################################################################## #### [from-sip-external] ;give external sip users congestion and hangup exten => _.,1,AbsoluteTimeout(15) exten => _.,2,Congestion exten => _.,3,Hangup [from-internal] ;allow phones to use applications include => app-directory include => app-dnd include => app-callforward include => app-callwaiting include => app-messagecenter include => app-calltrace include => parkedcalls include => from-internal-custom ;allow phones to dial other extensions include => ext-fax include => ext-local include => ext-group include => ext-queues include => ext-zapbarge include => ext-meetme include => ext-record include => ext-test ;allow phones to access trunks include => outbound-allroutes exten => s,1,Macro(hangupcall) exten => h,1,Macro(hangupcall) ; ######################################################################## #### ; Extension Contexts [ext] ; ######################################################################## #### [ext-zapbarge] exten => 888,1,SetGroup(${CALLERIDNUM}) exten => 888,2,Answer exten => 888,3,Wait(1) exten => 888,4,ZapBarge exten => 888,5,Hangup [ext-meetme] exten => _8X,1,Answer exten => _8X,2,Wait(1) exten => _8X,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4) exten => _8X,4,MeetMe(${EXTEN}|sM) exten => _8X,5,MeetMe(${EXTEN}|asM) exten => _8XX,1,Answer exten => _8XX,2,Wait(1) exten => _8XX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4) exten => _8XX,4,MeetMe(${EXTEN}|sM) exten => _8XX,5,MeetMe(${EXTEN}|asM) exten => _8XXX,1,Answer exten => _8XXX,2,Wait(1) exten => _8XXX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4) exten => _8XXX,4,MeetMe(${EXTEN}|sM) exten => _8XXX,5,MeetMe(${EXTEN}|asM) exten => _8XXXX,1,Answer exten => _8XXXX,2,Wait(1) exten => _8XXXX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4) exten => _8XXXX,4,MeetMe(${EXTEN}|sM) exten => _8XXXX,5,MeetMe(${EXTEN}|asM) [ext-fax] exten => s,1,Answer exten => s,2,Goto(in_fax,1) exten => in_fax,1,GotoIf($[${FAX_RX} = system]?2:analog_fax,1) exten => in_fax,2,Macro(faxreceive) exten => in_fax,3,system(tiff2ps -2eaz -w 8.5 -h 11 ${FAXFILE} | ps2pdf - ${FAXFILE}.pdf) exten => in_fax,4,system(mime-construct --to ${EMAILADDR} --subject "Fax from ${CALLERIDNUM} ${CALLERIDNAME}" --attachment ${CALLERIDNUM}.pdf --type application/pdf --file ${FAXFILE}.pdf) exten => in_fax,5,system(rm ${FAXFILE} ${FAXFILE}.pdf) exten => in_fax,6,Hangup exten => analog_fax,1,GotoIf($[${FAX_RX} = disabled]?3:2) ;if fax is disabled, just hang up exten => analog_fax,2,Dial(${FAX_RX},20,d) exten => analog_fax,3,Hangup ;exten => out_fax,1,wait(7) exten => out_fax,1,txfax(${TXFAX_NAME}|caller) exten => out_fax,2,Hangup exten => h,1,Hangup() [ext-record] exten => *77,1,Wait(2) exten => *77,2,Record(${CALLERIDNUM}ivrrecording:wav) exten => *77,3,Wait(2) exten => *77,4,Hangup exten => *99,1,Playback(${CALLERIDNUM}ivrrecording) exten => *99,2,Wait(2) exten => *99,3,Hangup ;this is where parked calls go if they time-out. Should probably re-ring [default] include => ext-local exten => s,1,Playback(vm-goodbye) exten => s,2,Macro(hangupcall) [ext-test] exten => 7777,1,Goto(from-pstn,s,1) exten => 666,1,Goto(ext-fax,in_fax,1) exten => h,1,Macro(hangupcall) ;echo test exten => *43,1,Answer exten => *43,2,Wait(2) exten => *43,3,Playback(demo-echotest) exten => *43,4,Echo exten => *43,5,Playback(demo-echodone) exten => *43,6,Hangup extensions_addtional.conf [globals] ZAPCHAN_300 = 1 ZAPCHAN_201 = 2 VM_PREFIX = * RINGTIMER = 15 REGTIME = * REGDAYS = * RECORDEXTEN = "" PARKNOTIFY = SIP/200 OUT_1 = ZAP/1 OUTPREFIX_1 = OUTMAXCHANS_1 = OUTCID_1 = OPERATOR = NULL = "" IN_OVERRIDE = forcereghours INCOMING = EXT-2007 FAX_RX_EMAIL = [EMAIL PROTECTED] FAX_RX = system FAX = E3007 = SIP E300 = ZAP E203 = SIP E202 = SIP E201 = ZAP E2007 = IAX2 DIRECTORY_OPTS = e DIRECTORY = last DIAL_OUT = 9 DIAL_OPTIONS = tr DIALOUTIDS = 1/ CALLFILENAME = "" AFTER_INCOMING = EXT-3007 [ext-group] include => ext-group-custom exten => 1,1,Macro(rg-group,30,,201-202-203-300) ; exten => 1,2,Goto(ext-group,1,1) ; [ext-local] include => ext-local-custom exten => 2007,1,Macro(exten-vm,[EMAIL PROTECTED],2007) exten => ${VM_PREFIX}2007,1,Macro(vm,2007) exten => 201,1,Macro(exten-vm,[EMAIL PROTECTED],201) exten => ${VM_PREFIX}201,1,Macro(vm,201) exten => 202,1,Macro(exten-vm,[EMAIL PROTECTED],202) exten => ${VM_PREFIX}202,1,Macro(vm,202) exten => 203,1,Macro(exten-vm,[EMAIL PROTECTED],203) exten => ${VM_PREFIX}203,1,Macro(vm,203) exten => 300,1,Macro(exten-vm,[EMAIL PROTECTED],300) exten => ${VM_PREFIX}300,1,Macro(vm,300) exten => 3007,1,Macro(exten-vm,[EMAIL PROTECTED],3007) exten => ${VM_PREFIX}3007,1,Macro(vm,3007) [outbound-allroutes] include => outbound-allroutes-custom include => outrt-001-9_outside [outrt-001-9_outside] include => outrt-001-9_outside-custom exten => _9.,1,Macro(dialout-trunk,1,${EXTEN:1}) exten => _9.,2,Macro(outisbusy) ; No available circuits -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Logan Sent: Tuesday, August 02, 2005 1:40 PM To: asterisk-users@lists.digium.com Subject: [Norton AntiSpam] Re: [Asterisk-Users] WHat does it take It might be helpful if you posted your setup, and relative sections of your extensions.conf etc. Is this a new install? are you using VoIP extensions, FX, or what? Is the busy signal when you call from one extension to the other, when you dial-out? or all of the above? > >Subject: [Asterisk-Users] WHat does it take > From: "Tim King" <[EMAIL PROTECTED]> > Date: Tue, 2 Aug 2005 11:28:37 -0400 > To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" > <asterisk-users@lists.digium.com> > >This is a multi-part message in MIME format. > >--===============6004780167333288876== >Content-Type: multipart/alternative; > boundary="----=_NextPart_000_00B7_01C59755.567994B0" > >This is a multi-part message in MIME format. > >------=_NextPart_000_00B7_01C59755.567994B0 >Content-Type: text/plain; > charset="us-ascii" >Content-Transfer-Encoding: 7bit > >How many times do you ask for help here before getting a respone? Every >single thing I do No matter what I get busy extensions. I am willing to pay >someone to help here. Anybody got a clue? > > > > >------=_NextPart_000_00B7_01C59755.567994B0 >Content-Type: text/html; > charset="us-ascii" >Content-Transfer-Encoding: quoted-printable > ><html xmlns:o=3D"urn:schemas-microsoft-com:office:office" = >xmlns:w=3D"urn:schemas-microsoft-com:office:word" = >xmlns=3D"http://www.w3.org/TR/REC-html40";> > ><head> ><META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = >charset=3Dus-ascii"> ><meta name=3DGenerator content=3D"Microsoft Word 11 (filtered medium)"> ><style> ><!-- > /* Style Definitions */ > p.MsoNormal, li.MsoNormal, div.MsoNormal > {margin:0in; > margin-bottom:.0001pt; > font-size:12.0pt; > font-family:"Times New Roman";} >a:link, span.MsoHyperlink > {color:blue; > text-decoration:underline;} >a:visited, span.MsoHyperlinkFollowed > {color:purple; > text-decoration:underline;} >p.MsoAutoSig, li.MsoAutoSig, div.MsoAutoSig > {margin:0in; > margin-bottom:.0001pt; _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
