When you register your * gw in gatekeeper you must say to gatekeeper which are the number that you must redirect to your * gw. For example, if you dial 555xxxxxx, you input in your oh323.conf must be like this:
[register] alias=BER-BER-GW-1 Gwprefix=555 Regards, srsergio -----Mensaje original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Thomas Haeger Enviado el: martes, 23 de septiembre de 2003 12:36 Para: [EMAIL PROTECTED] Asunto: AW: [Asterisk-Users] how to dial a h323 destination ? What is the gwprefix ? I try to connect the gk directly from our * gw.... -----Ursprungliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Sergio Serrano Revuelto Gesendet: Dienstag, 23. September 2003 12:27 An: [EMAIL PROTECTED] Betreff: RE: [Asterisk-Users] how to dial a h323 destination ? Try to add gwprefix in oh323.conf after your alias. You must know that you can configure * gw in gnugk.ini or in oh323.conf. I recommend you put in your oh323.conf. srsergio -----Mensaje original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Thomas Haeger Enviado el: martes, 23 de septiembre de 2003 12:07 Para: [EMAIL PROTECTED] Asunto: RE: [Asterisk-Users] how to dial a h323 destination ? Here is my oh323.conf ... ; ; Configuration file of OpenH323 channel driver ; ;----------------------------------------- ; General configuration options ; (ports, jitter, GK, ...) ;----------------------------------------- [general] ; ; Address to bind to for incoming connections. ; Default is ALL. ; listenAddress=0.0.0.0 ; ; Port to listen to. ; Default value is 1720. ; listenPort=1720 ; ; Port to connect to. ; (Used only when we don't have a gatekeeper) ; Default value is 1720. ; connectPort=1720 ; ; Enable fast start (yes,no). ; fastStart=yes ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=yes ; ; Enable early H.245 messages in call SETUP message. ; h245inSetup=yes ; ; Enable in-band-DTMF detection. ; (Note: Netmeeting uses in-band DTMFs) ; inBandDTMF=no ; ; Enable silence suppression. ; silenceSuppression=no ; ; Set jitter buffer (in milliseconds, 20...10000). ; jitterMin=20 jitterMax=100 ; ; Set IP Type-of-Service byte for RTP channels. ; Valid values for this option are: ; lowdelay, throughput, reliability, mincost, none ; ipTos=none ; ; Set the maximum number of inbound/outbound H.323 connections. ; outboundMax=50 inboundMax=10 ; ; Set tracing options for the H.323 wrapper library. ; libTraceFile can be 'stdout' or a full path name to a logfile ; libTraceLevel=3 ;libTraceFile=stdout libTraceFile=/var/log/asterisk/oh323.log ; ; Disable gatekeeper or specify a gatekeeper. ; Valid values for this option are: ; DISABLE, ; DISCOVER, ; <gatekeeper's DNS name>, ; <gatekeeper's ip>, ; GKID:<gatekeeper's id> ; gatekeeper=80.86.166.196 ;gatekeeper=DISABLE ; ; Set the gatekeeper password ; ;gatekeeperPassword=secret ; ; Set the mode for sending user-input ; Valid values for this option are: ; Q931 - Q.931 Keypad Information Element ; STRING - H.245 string ; TONE - H.245 tone ; RFC2833 - RFC2833 ; userInputMode=Q931 ; ; AMA flags (default, omit, billing, documentation) ; amaFlags=default ; ; Account code ; accountCode=H323 ; ; Set the default context of H.323 calls. ; context=voipout ;----------------------------------------- ; Configure H.323 aliases, prefixes and ; related ASTERISK's contexts ;----------------------------------------- [register] alias=BER-BER-GW-1 ; ; Aliases/prefixes associated with the default context ; defined in section [general]. ; ;alias=asterisk ;alias=123 ; ; Aliases/prefixes routed in "all-aliases" context. ; ;context=all-aliases ;alias=ASTERISK ;alias=666 ; ; Aliases/prefixes routed in "more-aliases" context. ; ;context=more-aliases ;alias=665 ; ; Aliases/prefixes routed in "all-prefixes" context. ; ;context=all-prefixes ;gwprefix=00 ;gwprefix=01 ; ; Aliases/prefixes routed in "more-stuff" context. ; ;context=more-stuff ;alias=664 ;gwprefix=02 ;----------------------------------------- ; Specify and configure CODEC related ; options ;----------------------------------------- [codecs] ; ; Define the codec list of the channel driver. ; Every "codec" option may have a "frames" option ; associated with it. ; Valid values for the "codec" option are: ; G711U - G.711 u-Law ; G711A - G.711 A-Law ; G7231 - G.723.1(6.3k) ; G72316K3 - G.723.1(6.3k) ; G72315K3 - G.723.1(5.3k) ; G7231A6K3 - G.723.1A(6.3k) ; G7231A6K3 - G.723.1A(6.3k) ; G728 - G.728 ; G729 - G.729 ; G729A - G.729A ; G729B - G.729B ; G729AB - G.729AB ; GSM0610 - GSM 0610 ; MSGSM - Microsoft GSM Audio Capability ; LPC10 - LPC-10 ; Number of frames in RTP packet (if not specified) is 1. ; ;codec=G729A ;frames=20 ;codec=GSM0610 ;frames=4 ;codec=G7231 ;frames=20 ;codec=G72316K3 ;codec=G72315K3 ;codec=G7231A6K3 ;codec=G7231A5K3 codec=G711A ;codec=G711U _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
