On 8/15/05, Ken Dresdell <[EMAIL PROTECTED]> wrote: > Hello everyone, > > Does anyone have experience with echo calibration for TDM card with > rxgain and txgain (Zapata.conf) and ztmonitor (CVS Head)? > > I have found very few information about it and what I have found makes > me confused. I have a phone number provided by my TelCo(1004 hz at 0db) > and from what I saw, I am supposed to calibrate my rxgain to get a 14800 > value with ztmonitor . > > Here is the information I found: > > > http://lists.digium.com/pipermail/asterisk-users/2004-November/071301.ht > ml > > > Does anyone have successfully reduced echo with this procedure? > > My main problem is that when I get 14800 with ztmonitor, I have now a > rxgain=14 and it seem to be too high for asterisk and I cannot dial out > anymore. > > Any suggestions? > > > Thanks in advance for your pointers > > Regards > > Ken > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
I have been doing a bit of this too lately. This was also useful. http://www.asteriskdocs.org/modules/tinycontent/content/docbook/current/docs-html/x1695.html Dan _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users