[Insert regular whinge about HTML formatted email here] > 1. D/120JCT-LS card with 12 ports. This ports are FXS ports? Depends from which side you're looking? From the telco side, yes - The D/120JCT-LS card is like 12 regular telephones. You plug 12 loop start phone lines in to this card and it provides termination.
> 2. It is true that "Dialogic drivers cost of $15 per channel" ? Yup. That's why we like cards from Digium - they're cheaper and better supported. > 3. Can I use this hardware with asterisk (for E1-ISDN > using Wildcard E400P) ? The card provides analogue line interfaces - I'm not sure what configuration you're trying to achieve? > 4. Anyone with experiance can tell me how they work and can > provide a configuration example? I've used similar Dialogic cards to provide IVR services under Windows but not Linux. You need some software to make the cards do stuff - you can write your own or use a scripting language or appgen. Check out CT-ADE from Intel (previously known as VOS from Parity Software). > 5. Other posible configuration for 1 E1-ISDN with 24-30 FXS > ports? You could use a TE410P card, have your E1 terminate on one port, then have one or more channel banks connected to the other ports to provide FXS ports. It's probably cheaper to find T1 channel banks, so you'd need a couple of you needed 30 FXS. Cheers Paul _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
