Do you need a "hangup" in your dialplan? -Jonathan
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Howard Leadmon Sent: Friday, August 19, 2005 4:06 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [Asterisk-Users] Ascend Pipeline POTS to TDM400P FXO Question.. I have a TDM400P with some FXO ports, and I wanted to connect the two POTS lines from my Pipeline-75 ISDN router into the FXO interfaces on my Asterisk server. Hooked it up, seemed fine, called in and it answered. The problem is when the call is hung up on, the FXO port never drops. So of course then the P75 just holds the line off hook and you get a busy. So it's good for the first call, and then it's done. Does anyone know of any adjustments that will make this work? Figured maybe someone here has run into such an issue before. Hooking it to a normal POTS line works great, but out of the P75 seems to be a no-go outside of the first call. --- Howard Leadmon http://www.leadmon.net _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
