Derek/Jeremy/Kevin,
Thank you all for your comments. I suspected the issue would be the
fact that we don't have a PRI but a T1. However, I decided to post
the question to the list simply because I would assume that because
the carrier is looking at our circuit configuration when answering my
questions, they should know we don't have a PRI and they should have
told us that we need PRI or it won't work.
To address your previous post, we are setting it to a caller id of a
number assigned to us.
I'm just confused simply because of the fact that the carrier never
caught or mentioned that we don't have a PRI and I spoke with 4 of
their engineers and 2 supervisors. Go figure. I guess it's time to
switch to a better carrier that knows what the heck they're doing.
Thanks again,
Waldo
On Aug 19, 2005, at 5:35 PM, dbruce wrote:
Hmm... I missed what Kevin and Jeremy caught...
But... you did mention TE410P and T1 circuit from the provider...
So, what exactly is between the TE410P and the T1 circuit... As you
have it
configured, it should not work at all....
If the far end switch is a DMS100 you should have signalling=pri_cpe.
Regards,
Derek
----- Original Message -----
From: "Waldo Rubinstein" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Sent: Friday, August 19, 2005 2:51 PM
Subject: [Asterisk-Users] Overriding Caller ID
Hello list,
We have some kind of a problem with our Asterisk installation. We
want to be able to publish different caller id when placing outbound
calls through the PSTN. We have Asterisk with TE410P and T1 from FDN
Communications. The problem is that all our outbound calls show our
main number, regardless of what we set with SetCallerID, even using
CallingPres with all possible combinations. When speaking with FDN,
they say they have set their T1 to show our main number for outbound
calls, but that we should be able to override that with no problem.
As I said, I have tried all possible combinations, yet, nothing seems
to work. Below are snippets of some of our configs:
extensions.conf
;
; Local calls
;
exten => _NXXNXXXXXX,1,CallingPres(32)
exten => _NXXNXXXXXX,2,SetCallerID(2125551234)
exten => _NXXNXXXXXX,3,Dial(${TRUNK_LO}/${EXTEN})
zapata.conf
[channels]
usecallerid=yes
cidsignalling=bell
cidstart=ring
hidecallerid=no
restrictcid=no
usecallingpres=yes
callerid=asreceived
switchtype = dms100
signalling = em_w
group = 1
context=inbound
callerid=asreceived
channel => 1-24
Does anyone have any suggestions?
Thanks,
Waldo
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users