On Wed, Aug 03, 2005 at 11:28:19AM -0500, [EMAIL PROTECTED] wrote: > 10. Inter-Tel AXXESS failure: HDLC Bad FCS (8) on Primary > D-channel of span 1 (Gavin Hamill) > Date: Wed, 3 Aug 2005 15:32:48 +0100 > From: Gavin Hamill <[EMAIL PROTECTED]> > Subject: [Asterisk-Users] Inter-Tel AXXESS failure: HDLC Bad FCS (8) > on Primary D-channel of span 1 > To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" > <asterisk-users@lists.digium.com> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="us-ascii" > > All the messages I've read on this are from people experiencing these errors > in quiet times - I get them as soon as I plug a port on our TE410P to an > Inter-Tel AXXESS PBX.. and I get them continuously... > > I'm just sticking an * box in between ISDN30e (we're in the UK so euroisdn) > and the PBX.. and whilst the telco ISDN30e side works like a charm [1] I > simply can't get a reliable link to the PBX.. > > I've tried two different T1 crossovers (1-4, 2-5) with identical results and > zapata.conf is indeed using signalling=pri_cpe for the telco ISDN30e and > pri_net for the PBX > > Digium support have taken me through loopback testing which came out perfect, > and the card is not sharing any IRQ, yet this error renders the card > useless :( Digium are reluctant to accept a return and replace the card since > they don't believe it to be at fault - and neither do I. > > I see the same behaviour with 1.0.9 asterisk / libpri and 1.0.9.1 zaptel... > and CVS-HEAD versions of everything.
Try the 1.0.7 zaptel drivers with the 1.0.9 asterisk. Works fine here. Scary but true. Edwin -- Edwin Groothuis | Personal website: http://www.mavetju.org [EMAIL PROTECTED] | Weblog: http://weblog.barnet.com.au/edwin/ _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
