Matt Schulte wrote:
All,
I'm having a heck of a time getting hdlc to work on kernel
2.6.11.9 .. I compiled hdlc, hdlc_gen, hdlc_cisco, hdlc_raw, into the
kernel (note into, and not 'modules').
System comes up, I configured zaptel.conf
span=1,0,0,esf,b8zs
nethdlc=1-24
modprobe wct4xxp
ztcfg
sethdlc hdlc0 cisco
ifconfig hdlc0 up
All of this works fine, believe it or not. I have a T1 cross plugged
into a cisco 2600 using out of the box configuration. I cannot get line
protocol to come up on the cisco. Suggestions? Also, doing a ifconfig
hdlc0 down does a core dump of the kernel, lol. Is this normal?
I'm using sethdlc 1.15 as mentioned in the wiki instructions.
Matt,
Normal, yes, good, no. I have experienced the exact same behavior on a
number of machines, and so have many others. The certainly seems to be
in zaptel (zt_net_stop, if I recall), but I don't know if it is
"priority" or not...
--
Kristian Kielhofner
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
