On Fri, 2005-08-26 at 12:37 -0500, Eric Wieling aka ManxPower wrote: > VaibhaV Sharma wrote: > > Hello, > > I have 2 TDM400p cards with 8 FXO modules and 6 pots lines connected to > > them (last 2 channels are unused but configured in zaptel). Even when > > the lines are onhook, the Tx values settle down to 0 but the Rx values > > still jump up and down. For some lines the values vary around 440, for > > others around 250 and for one of the unused FXO ports, its around 97 all > > the time. > > > > With txgain/rxgain set to 0.0, call volumes were considerably low. > > Hence, I have txgain set to 1.0 and rxgain set to 6.0. > > why not txgain=-6 to start out with?
With txgain set to 0.0, people on the other end complained about low volume from our side hence I started out with a positive value. Are the ztmonitor Rx: values of around 90 - 400 normal even when the zap channel is Onhook or do I have some problem on the pots lines that I should fix? Thanks, -- VaibhaV _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
