Hi there,
We are using * with an Option 11C - we tried all of the various
protocols and the only one we could get to work satisfactorily was
5ESS, with the * as CO and the Nortel as remote. The one drawback of
this approach is getting name information for caller ID - because the
Nortel sees the * as CO, it won't send the name information.
/etc/zaptel.conf:
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
#clear=1-24
loadzone = us
defaultzone=us
/etc/asterisk/zapata.conf:
[trunkgroups]
[channels]
context=incoming
switchtype=5ess
usecallingpres=yes
echocancel=128
usecallerid=yes
echocancelwhenbridged=yes
echotraining=yes
echotraining=800
rxgain=-4.0
txgain=-6.0
group=1
callgroup=1
pickupgroup=1
signalling = pri_net
channel => 1-23
musiconhold=default
Any use?
Regards,
--
Anthony Rodgers
Business Systems Analyst
District of North Vancouver
Web: http://www.dnv.org
RSS Feed: http://www.dnv.org/rss.asp
On 27-Aug-05, at 7:20 AM, Alvaro Parres wrote:
Hi, i have one Asterisk with a Digium E1 card, and a Meridian Nortel
Release 11.
I need to connect both of them. We are using MFC/R2 for this..
The Diagram:
[ NORTEL ] ( AMI ) ------------------------------------------------
(DIGIUM) [ ASTERISK]
we have green light at the digium card, and at asterisk we see all 31
channels as idle.
But when i want to recive a call from the Nortel to the Asterisk i get
at the Nortel only a empty sound, and after about 15 o 20 sec it's
hangup.
Any suggestion ?
The log at Asterisk is:
Aug 27 09:16:20 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 <- 0001 [1/ 1/Idle /Idle
]
Aug 27 09:16:20 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Detected
Aug 27 09:16:20 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Making a new call with CRN 32769
Aug 27 09:16:20 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 1101 -> [2/ 2/Idle /Idle
]
Aug 27 09:16:20 WARNING[6496]: chan_unicall.c:2865 handle_uc_event:
Unicall/30 event Detected
Aug 27 09:16:20 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 <- 0001 [1/ 1/Idle /Idle
]
Aug 27 09:16:20 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Detected
Aug 27 09:16:20 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Making a new call with CRN 32769
Aug 27 09:16:20 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 1101 -> [2/ 2/Idle /Idle
]
Aug 27 09:16:20 WARNING[6496]: chan_unicall.c:2865 handle_uc_event:
Unicall/30 event Detected
tel2*CLI> Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704
unicall_report: MFC/R2 UniCall/30 <- 1001 [2/ 2/Seize ack
/Seize ack ]
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Far end disconnected(cause=Normal, unspecified cause
[31]) - state 0x2
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:2865 handle_uc_event:
Unicall/30 event Far end disconnected
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:3198 handle_uc_event:
CRN 32769 - far disconnected cause=Normal, unspecified cause [31]
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Call control(6)
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Drop call(cause=Normal Clearing [16])
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Call disconnected(cause=Normal, unspecified cause
[31]) - state 0x800
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:2865 handle_uc_event:
Unicall/30 event Drop call
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Call control(7)
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Release call
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 1001 -> [1/ 1000/Clear fwd /Seize ack
]
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 <- 1001 [2/ 2/Seize ack /Seize ack
]
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Far end disconnected(cause=Normal, unspecified cause
[31]) - state 0x2
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:2865 handle_uc_event:
Unicall/30 event Far end disconnected
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:3198 handle_uc_event:
CRN 32769 - far disconnected cause=Normal, unspecified cause [31]
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Call control(6)
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Drop call(cause=Normal Clearing [16])
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Call disconnected(cause=Normal, unspecified cause
[31]) - state 0x800
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:2865 handle_uc_event:
Unicall/30 event Drop call
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Call control(7)
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Release call
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 1001 -> [1/ 1000/Clear fwd /Seize ack
]
tel2*CLI> Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704
unicall_report: MFC/R2 UniCall/30 Release guard expired
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Destroying call with CRN 32769
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Release guard expired
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:704 unicall_report:
MFC/R2 UniCall/30 Destroying call with CRN 32769
tel2*CLI> Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:2865
handle_uc_event: Unicall/30 event Release call
-- Unicall/30 released
Aug 27 09:16:36 WARNING[6496]: chan_unicall.c:2865 handle_uc_event:
Unicall/30 event Release call
-- Unicall/30 released
unicall.conf
[channels]
context=callin
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
threewaycalling=no
transfer=no
cancallforward=no
callreturn=no
echocancel=no
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
loglevel=1023
protocolclass=mfcr2
protocolvariant=mx,4,4
protocolend=cpe ;co
group = 3
channel => 1-31
zaptel.conf
span=1,0,0,cas,hdb3
cas=1-31:1101
defaultzone=us
Thanks.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
