On Thursday 01 September 2005 06:35, Alex Ongena wrote: > I encounter 2 major problems: > 1) Transmitting and receiving van Fax is very unreliable (on the CLI I see > a Native bridging (seems to be 911.ulaw, 64 kbit high quality). > Sometimes the Fax is Ok, sometimes I miss a few lines, sometimes it's > impossible. The same problem is there when sending or receiving faxes.
This is a well-known issue with the current drivers, although nobody's really stepped up to identify when exactly this started happenning (as the driver code was changed) or why. > 2) I'm trying 3 different Analog phones and having 3 different behaviors: > 1 phone 'ringes' normally > 1 phone 'ringes' a bit cripled (instead of ring-ring... ring-ring..., > it does 'ring-ri... ri.... ring... ri...) > 1 phone does not ring at all when Asterisk says 'Ringing Zap/6'. > However, when I do an 'off-hook' on this phone, I get a normal tone signal > and I can dial and talk perfectly. DTMF is recognised too. It simply does > not ring on incoming calls. Have you tried the 'boostringer=1' module option? If you swap phones and ports around (i.e. try phone #3 in phone #1's port) does the problem stay with the phone or the port? -A. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users