Hello Goran, Yes, you are right ! I have read too quickly your question, sorry. I have checked myself with my * and same thing appears here. If you will have the solution before me, please, post it :-)
For F.T. prices list, it is not realy easy... You can start by browsing from here : http://www.agence.francetelecom.com/vf/home_pro/index.htm And here : http://www.francetelecom.com/fr/entreprises/grandes_entreprises/solutions/re seaux/tarifs_voix/plan_tarif/att00028453/tarifs.html But, there is a lot of different contracts and discounts... Good Luck. Best Regards, Francois BERGERET, France. -----Message d'origine----- De : Goran Dj. [mailto:[EMAIL PROTECTED] Envoyé : jeudi 1 septembre 2005 22:48 À : [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Objet : Re: [Asterisk-Users] How to shorten ringing stop detection onX101Pclone? This working only when zap answer call. But, if zap don't answer (ringing), and (outside) caller hangup, then there is no busy tone. By the way, do you know some voip provider in Paris with Direct Inward Dial numbers? Where can I found best information about prices of France Telecom (PRI od BRI ISDN/RNIS, tarrifs, etc...) ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" <asterisk-users@lists.digium.com> Sent: cet 1. sep 2005 7:13 Subject: RE : [Asterisk-Users] How to shorten ringing stop detection onX101Pclone? Hello Goran, Modify your /etc/asterisk/zapata.conf like this : busydetect=yes busycount=3 And, of course, you must have chosen your correct country for ringing mode in your /etc/zaptel.conf file : loadzone=fr defaultzone=fr I am in France :-) Good luck ! Best Regards, Francois BERGERET, France. -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Goran Dj. Envoyé : jeudi 1 septembre 2005 02:26 À : Asterisk Users Mailing List - Non-Commercial Discussion Objet : [Asterisk-Users] How to shorten ringing stop detection on X101Pclone? When x101p clone receive ring signal from phone line, my voip phone start ringing. But, if caller hang-up at some time, phone continues to ringing 10 second more. How can I shorten that time? Pause betwen incoming rings on my phone line is 4s, so when x101p clone (wcfxo driver) do not receive next ring signal after 4.5 sec, call should be consider as ended. What should I change to set that time (4.5 sec) for incoming ring end detection? _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users