On Sun, 4 Sep 2005, Stijn Jonker wrote: > On 04-Sep-2005 19:34, Jeroen Baten wrote: > > Op zondag 4 september 2005 11:10, schreef Stijn Jonker: > > > >>Hello Jeroen, > >> > >>On 04-Sep-2005 9:22, Jeroen Baten wrote: > >> > >>>Op zondag 4 september 2005 09:07, schreef Jeroen Baten: > >>> > >>>>Op zondag 4 september 2005 00:21, schreef [EMAIL PROTECTED]: > >>>> > >>>>>Ok - what the heck is this?--------------------v > >>>>>Dial("SIP/4001-2fea", "Zap/2/<mycellphonenumber}") > >>>>> > >>>>>I've never seen a } used in a dial statement... > >>>> > >>>>sorry, one } to many. in extensions it reads: > >>>>exten => _97.,1,Dial(Zap/2/${EXTEN:2}) > >>>> > >>>>still no joy though. Even changed the timeout: > >>>> > >>>>Executing Dial("SIP/4001-b455", "Zap/2/456343|15") in new stack > >>>> -- Called 2/456343 > >>>> -- Channel 0/2, span 1 got hangup > >>>> -- Hungup 'Zap/2-1' > >>>> == No one is available to answer at this time > >> > >>What ISDN card do you have? It sounds like a quadbri, and that your in > >>the netherlands, so am I. That leaves one question is it directly > >>connected to a kpn line or via an other pbx/pabx? > > > I have a BRI 2-channel Eicon Diva on KPN and yes, look at the sig, I'm > > dutch. > > > > Which part of your conf should I use and not use? > > That depends on the driver, do you use chan_capi or junghanns bristuff > for the eicon?
bristuff for Eicon Diva card? That's not possible. Which card do you use exactly? Is it a DIVA PCI or DIVA Server card? In case of DIVA PCI you can use mISDN/chan_misdn. For DIVA Server chan_capi would be your choice. Armin _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users