I'm having a bad time getting 3 TE410P's and one TDM400 working in the same box.
At some point during the install of second card, wcusb starts loading. I believe this is one of the TE410 Cards causing this as there is no usb enabled. Module Size Used by Not tainted audit 89880 2 (autoclean) usbserial 23420 0 (autoclean) (unused) lp 8964 0 (autoclean) parport 36832 0 (autoclean) [lp] autofs4 15832 0 (autoclean) (unused) tg3 67368 1 wcusb 19552 0 (unused) usbcore 77376 0 [usbserial wcusb] wct4xxp 70752 0 (unused) zaptel 179872 4 [wcusb wct4xxp] floppy 56656 0 (autoclean) sg 36236 0 (autoclean) (unused) microcode 5688 0 (autoclean) ext3 85736 2 jbd 50668 2 [ext3] aic7xxx 160880 0 (unused) diskdumplib 4940 0 [aic7xxx] sd_mod 13968 0 (unused) scsi_mod 106664 3 [sg aic7xxx sd_mod] If I rmmod the usb stuff, it come back on next reboot... At reboot, zaptel is complaining that modules are busy and can't remove them. How can I stop asterisk from loading this ? Bart _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
