Not all providers use crc4 you can try to remove the entry -----Oorspronkelijk bericht----- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens altus Verzonden: vrijdag 9 september 2005 7:24 Aan: Baris Simsek CC: asterisk Onderwerp: Re: [Asterisk-Users] pri gateway
These are my configs for a sangoma 4 port connected to E1's in the UK loadzone = us loadzone=uk defaultzone=uk span=1,1,0,ccs,hdb3,crc4 span=2,1,0,ccs,hdb3,crc4 span=3,1,0,ccs,hdb3,crc4 span=4,1,0,ccs,hdb3,crc4 # card 0 - span 1 bchan=1-15,17-31 dchan=16 # card 0 - span 2 bchan=32-46,48-62 dchan=47 # card 0 - span 3 bchan=63-77,79-93 dchan=78 # card 0 - span 4 bchan=94-108,110-124 dchan=109 and zapata.conf [channels] context=default switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown priindication = outofband usecallerid=yes hidecallerid=no restrictcid=no usecallingpres=yes callwaitingcallerid=yes echocancel=yes echocancelwhenbridged=yes echotraining=yes callgroup=1 pickupgroup=1 ; card 0 - span 1 switchtype = euroisdn signalling = pri_cpe group = 1 context = incoming channel => 1-15,17-31 ; card 0 - span 2 switchtype = euroisdn signalling = pri_cpe group = 1 context = incoming channel => 32-46,48-62 ; card 0 - span 3 switchtype = euroisdn signalling = pri_cpe group = 1 context = incoming channel => 63-77,79-93 ; card 0 - span 4 switchtype = euroisdn signalling = pri_cpe group = 1 context = incoming channel => 94-108,110-124 Maybe its your telco?? On Thu, 2005-09-08 at 15:23 +0300, Baris Simsek wrote: > hi, > > my asterisk version is 1.0.9 > > /etc/zaptel.conf > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > bchan=17-31 > > it is comfortable with Turkish Telecom. i tried before and it works. > > /etc/asterisk/zapata.conf > [channels] > switchtype=euroisdn > signalling=pri_cpe > context=incoming > group=1 > channel=>1-15,17-31 > > Leds are lighting at start. When i run /etc/init.d/zaptel they go out. > And i can see the modules are installed. and i see that, layer 1 is > going up after zaptel. So i am sure there is no problem with drivers. > I think it is connected to asterisk. any idea? thanks... > > altus wrote: > > >what about a copy of your zapata.conf and zaptel.conf,what color is > >the leds > > > >On Thu, 2005-09-08 at 12:42 +0300, Baris Simsek wrote: > > > > > >>hello, > >> > >>i installed an asterisk as a pri gateway. Everything is okay. > >>/etc/init.d/zaptel starts successfull with wct4xxp module. > >>/etc/init.d/asterisk starts also successfully. I tested my pri cable > >>and it works. But still my span isn't up. I don't see any error. Do > >>you have any idea? What else i should check? Thanks. > >> > >>My card is 4 span Wildcard TE410P > >><http://www.digium.com/index.php?menu=product_detail&category=hardwa > >>re&product=TE410P> > >> > >># lsmod > >>wct4xxp 106688 62 > >>zaptel 226820 129 wct4xxp > >> > >># asterisk -r > >>gw*CLI> pri show span 1 > >>Primary D-channel: 16 > >>Status: Provisioned, In Alarm, Down, Active > >>Switchtype: EuroISDN > >>Type: CPE > >>Window Length: 0/7 > >>Sentrej: 0 > >>SolicitFbit: 0 > >>Retrans: 0 > >>Busy: 0 > >>Overlap Dial: 0 > >>T200 Timer: 1000 > >>T203 Timer: 10000 > >>T305 Timer: 30000 > >>T308 Timer: 4000 > >>T313 Timer: 4000 > >>N200 Counter: 3 > >> > >> > > > -- Thanks Altus Snyman Stormcorp Network Solutions +27 11 8071141 exten 301 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users