On Fri, Sep 09, 2005 at 09:41:58PM +0200, Sander wrote: > sure my mail is [EMAIL PROTECTED]
i configure that but the system when i dial a 9 form get outside line give me the error "all circuits are busy now" and the cat /proc/zaptel/1 [EMAIL PROTECTED] asterisk]# cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3/CCS YELLOW 1 WCT1/0/1 Clear (In use) 2 WCT1/0/2 Clear (In use) 3 WCT1/0/3 Clear (In use) 4 WCT1/0/4 Clear (In use) 5 WCT1/0/5 Clear (In use) 6 WCT1/0/6 Clear (In use) 7 WCT1/0/7 Clear (In use) 8 WCT1/0/8 Clear (In use) 9 WCT1/0/9 Clear (In use) 10 WCT1/0/10 Clear (In use) 11 WCT1/0/11 Clear (In use) 12 WCT1/0/12 Clear (In use) 13 WCT1/0/13 Clear (In use) 14 WCT1/0/14 Clear (In use) 15 WCT1/0/15 Clear (In use) 16 WCT1/0/16 HDLCFCS (In use) 17 WCT1/0/17 Clear (In use) 18 WCT1/0/18 Clear (In use) 19 WCT1/0/19 Clear (In use) 20 WCT1/0/20 Clear (In use) 21 WCT1/0/21 Clear (In use) 22 WCT1/0/22 Clear (In use) 23 WCT1/0/23 Clear (In use) 24 WCT1/0/24 Clear (In use) 25 WCT1/0/25 Clear (In use) 26 WCT1/0/26 Clear (In use) 27 WCT1/0/27 Clear (In use) 28 WCT1/0/28 Clear (In use) 29 WCT1/0/29 Clear (In use) 30 WCT1/0/30 Clear (In use) 31 WCT1/0/31 Clear (In use) show me that... is that correct? > > Ok i'm looking will try to make a small manual for you, please make sure you > have set the jumers of the pri card in asterik at the right position? Voor > TE mode > Here is my config of the e1 card the only thing that does not work on my pbx > is to do a reboot with de cable plugged in the asterisk pbx don't know why > but it just hangs. so boot after power down > > > Zaptel: > loadzone=us > defaultzone=us > > > # E1 definition: crc4 check achter hdb3 ,crc4 > span=1,1,0,ccs,hdb3 > > #E1: > bchan=1-15,17-31 > dchan=16 > > zapata > > [channels] > signalling=pri_cpe > switchtype=national > echocancel=yes > echocancelwhenbridged=no > callerid=asreceived > group=1 > immediate = no > context= incomming ; Points to the default context of your extensions.conf > channel => 1-15,17-31 > > > And on the siemens pbx turn of crc4 check on the e1 card configuration maybe > you can give me your mail adres so i can make screenshots of the manager e > configuration tool i can't mail pictures to the user list > > > > -----Oorspronkelijk bericht----- > Van: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Namens Pablo Allietti > Verzonden: vrijdag 9 september 2005 20:29 > Aan: Asterisk Users Mailing List - Non-Commercial Discussion > Onderwerp: [Asterisk-Users] Re: siemens pbx what i ask techinician? > > On Fri, Sep 09, 2005 at 07:20:58PM +0200, Sander wrote: > > > uuauuu that will great! > i cant undertand too much about internal connection because. i have a PC > with a te110p and my siemens is a hipath 3500 with a s2m/pri card is a > E1 card. but i dont know how to connect between them. i have always the red > alarm in the te110p. my conf files are > > both of this files i copy and paste from internet. > > /etc/zaptel.conf > span=1,0,0,ccs,hdb3,crc4,yellow > bchan=1-15,17-31 > dchan=16 > loadzone = us > defaultzone = us > > and the /etc/asterisk/zapata.conf > > [channels] > context=zap-in > ;switchtype=qsig > pridialplan=national > signalling=pri_cpe > usecallerid=yes > hidecallerid=no > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > echocancel=yes > rxgain=0.0 > txgain=0.0 > > group=1 > callgroup=1 > pickupgroup=1 > > immediate=no > callprogress=no > > callerid=asreceived > group=1 > signalling=pri_net > channel => 1-15,17-31 > > please help me!!! thanks a lot for your time!!!! > > > > > Do you want to connect the asterisk with pri or with internal isdn? > > And what model pbx do you have? then i can tell you how to configure? > > Maybe some screenshots with it > > > > -----Oorspronkelijk bericht----- > > Van: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Namens Pablo Allietti > > Verzonden: vrijdag 9 september 2005 19:35 > > Aan: Asterisk Users Mailing List - Non-Commercial Discussion > > Onderwerp: [Asterisk-Users] Re: siemens pbx what i ask techinician? > > > > On Fri, Sep 09, 2005 at 05:39:22PM +0200, Sander wrote: > > > > > > > thanks Sander but i have the soft, and i can enter to the pbx conf and > > modify all settings, but i dont know how settings i need to change. > > > > > It's not that easy then everytime you want to change someting for > > > testing you have to ask them to change something i can give you the > > > software for programming siemens pbx if you want > > > > > > > > > > > > > > > -----Oorspronkelijk bericht----- > > > Van: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Namens Pablo > > > Allietti > > > Verzonden: vrijdag 9 september 2005 16:09 > > > Aan: asterisk-users@lists.digium.com > > > Onderwerp: [Asterisk-Users] siemens pbx what i ask techinician? > > > > > > im really newbie, and i have a siemens digital pbx work in my work. > > > i have 4 outside lines and the pbx has a E1/PRI card. what i need to > > > ask my siemens > > > provider(techinicians) to do in the pbx? > > > > > > i only have in my pbx the 9 to get a line to go outside is very > > > simple. but i dont know what i need to ask them to programming. > > > please > > help me. > > > -- > > > > > > .- > > > > > > Pablo Allietti > > > LACNIC > > > > > > _______________________________________________ > > > --Bandwidth and Colocation sponsored by Easynews.com -- > > > > > > Asterisk-Users mailing list > > > Asterisk-Users@lists.digium.com > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > > --Bandwidth and Colocation sponsored by Easynews.com -- > > > > > > Asterisk-Users mailing list > > > Asterisk-Users@lists.digium.com > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > ---end quoted text--- > > > > -- > > > > .- > > > > Pablo Allietti > > LACNIC > > > > _______________________________________________ > > --Bandwidth and Colocation sponsored by Easynews.com -- > > > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > --Bandwidth and Colocation sponsored by Easynews.com -- > > > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > ---end quoted text--- > > -- > > .- > > Pablo Allietti > LACNIC > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users ---end quoted text--- -- .- Pablo Allietti LACNIC _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users