We had our share of problems with the Fritz Card on FC4. Everything was OK except the speech was one-way in the outgoing direction. We spent days on it and couldn't find a solution to it. We discovered that the device nodes were not created correctly by udev. Enough was enough, we switched to SuSE 9.2 and within a day everything worked beautifully without much effort. I think FC4 has some serious problems with udev (some even claimed that it's not stable release) and I have never seen anyone successfully ran Asterisk on it.
If you have a choice, switch to SuSE or other Linux distribution such as Debian. /Y.T. --- Innocent Evil <[EMAIL PROTECTED]> wrote: > My TDM400 on fc4 was working great.. > all of sudden ..i am having the same issue ..you > guys are having > all i tried to run asterisk as non-root user.. and I > was able to run it as > non-root > and was able to receive and send call using > asterisk.. > > I am not sure.. what thing I did wrong and coz all > the trouble.. > > Thanks > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > Sent: Tue, 13 Sep 2005 15:09:52 -0500 > > To: asterisk-users@lists.digium.com > > Subject: Re: [Asterisk-Users] Fedora Core 4 not > recognizing X100P cards > > > > > > I have the same problem. > > > > I've been having a bit of trouble getting the > cards to work with > > asterisk, and I thought perhaps you might know > what I might be doing > > wrong. I installed them in a linux box, and when I > check to see if the > > OS has recognized them it looks fine: > > > > They show up as HSP56 MicroModem (rev 04) > > > > [EMAIL PROTECTED]> lspci > > 00:00.0 Host bridge: Intel Corporation 82850 850 > (Tehama) Chipset Host > > Bridge > > (MCH) (rev 04) > > 00:01.0 PCI bridge: Intel Corporation 82850 850 > (Tehama) Chipset AGP > > Bridge (rev > > 04) > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI > Bridge (rev 04) > > 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA > Bridge (LPC) (rev 04) > > 00:1f.1 IDE interface: Intel Corporation 82801BA > IDE U100 (rev 04) > > 00:1f.2 USB Controller: Intel Corporation > 82801BA/BAM USB (Hub #1) (rev > > 04) > > 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus > (rev 04) > > 00:1f.5 Multimedia audio controller: Intel > Corporation 82801BA/BAM AC'97 > > Audio > > (rev 04) > > 01:00.0 VGA compatible controller: nVidia > Corporation NV18 [GeForce4 MX > > 4000 AGP > > 8x] (rev c1) > > 02:01.0 USB Controller: NEC Corporation USB (rev > 41) > > 02:01.1 USB Controller: NEC Corporation USB (rev > 41) > > 02:01.2 USB Controller: NEC Corporation USB 2.0 > (rev 02) > > 02:09.0 Modem: PCTel Inc HSP56 MicroModem (rev 04) > > 02:0a.0 Modem: PCTel Inc: Unknown device 2181 (rev > 04) > > 02:0b.0 Modem: PCTel Inc HSP56 MicroModem (rev 04) > > 02:0c.0 Ethernet controller: 3Com Corporation > 3c905C-TX/TX-M [Tornado] > > (rev 78) > > 02:0d.0 Modem: PCTel Inc HSP56 MicroModem (rev 04) > > > > > > But when I try to start the wcfxo module it > doesn't work: > > > > [EMAIL PROTECTED]> modprobe wcfxo > > Notice: Configuration file is /etc/zaptel.conf > > line 146: Unable to open master device > '/dev/zap/ctl' > > > > > > And the linux kernel doesn't quite recognize them: > > > > Sep 6 18:58:45 asterisk2 kernel: zaptel: no > version for > > "struct_module" found: kernel tainted. > > Sep 6 18:58:45 asterisk2 kernel: Zapata Telephony > Interface Registered > > on major 196 > > > > > > When I try to configure the ztcfg it doesn't find > anything on channel 1: > > > > > > [EMAIL PROTECTED]> /sbin/ztcfg -vvv > > > > Zaptel Configuration > > ====================== > > > > Channel map: > > > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > > Channel 03: FXS Kewlstart (Default) (Slaves: 03) > > Channel 04: FXS Kewlstart (Default) (Slaves: 04) > > > > 4 channels configured. > > > > ZT_CHANCONFIG failed on channel 1: No such device > or address (6) > > > > > > And Asterisk can't get them working: > > > > [chan_zap.so] => (Zapata Telephony) > > == Parsing '/etc/asterisk/zapata.conf': Found > > Sep 6 19:01:34 WARNING[2549]: chan_zap.c:778 > zt_open: Unable to > > specify channel > > 1: No such device or address > > Sep 6 19:01:34 ERROR[2549]: chan_zap.c:6239 > mkintf: Unable to open > > channel 1: > > No such device or address > > here = 0, tmp->channel = 1, channel = 1 > > Sep 6 19:01:34 ERROR[2549]: chan_zap.c:9191 > setup_zap: Unable to > > register > > channel '1-4' > > Sep 6 19:01:34 WARNING[2549]: loader.c:345 > ast_load_resource: > > chan_zap.so: > > load_module failed, returning -1 > > == Unregistered channel type 'Tor' > > == Unregistered channel type 'Zap' > > Sep 6 19:01:34 WARNING[2549]: loader.c:440 > load_modules: Loading module > > chan_zap.so failed! > > > > > > I've tried most of the pci cards and they all give > the same result. > > When using a different type of card in that same > PC i don't get those > > errors. I thought perhaps there is some software > upgrade necessary for > > them to work, or something along those lines? Any > help you could mention > > would be very appreciated. Thanks > > > > > > -- > > Ing CIP Alejandro Celi Mariátegui > > <[EMAIL PROTECTED]> > > > > > > El mar, 13-09-2005 a las 15:01, Mojo with Horan & > Company, LLC escribió: > > > hisax seems to be a loadable module for an ISDN > card. if: > > > > > > # lsmod | grep hisax > > > > > > prints any output, try > > > > > > # rmmod hisax; modprobe zaptel > > > > > > ? > > > > > > hth > > > Mojo > > > > > > Shawn Porter wrote: > > > > I am getting quite frustrated today, so please > bear with me. > > > > > > > > I just installed Fedora Core 4 (was running > RedHat 9 with a working > > > > Asterisk) > > > > > > > > now my Fedora does not appear to be > recognizing my X100P (clone) at > > all. > > > > > > > > > > > > > > > > Hardware browser just shows them as unknown > device. driver: hisax > > > > > > > > So, of course, my zaptel drivers do not work > and therefore my > > asterisk > > > > does not work. > === message truncated === Send instant messages to your online friends http://au.messenger.yahoo.com _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
