I am having problems sending and receiving calls over the T1. They never seem to connect - outbound keeps ringing, inbound gets busy. The T1 looks ok - no errors on the line. Any ideas on what is wrong? I have tried a variety of fxsks and fxoks configurations without avail. This is a single [EMAIL PROTECTED] system with a single T1 card. Robbed Bit T1 ami, d4.
------------------inbound call
-- Starting simple switch on 'Zap/7-1'
-- Starting simple switch on 'Zap/14-1'
-- Executing Playback("Zap/7-1", "vm-goodbye") in new stack
-- Playing 'vm-goodbye' (language 'en')
-- Executing Macro("Zap/7-1", "hangupcall") in new stack
-- Executing ResetCDR("Zap/7-1", "w") in new stack
-- Executing NoCDR("Zap/7-1", "") in new stack
-- Executing Wait("Zap/7-1", "5") in new stack
-- Executing Playback("Zap/14-1", "vm-goodbye") in new stack
-- Playing 'vm-goodbye' (language 'en')
-- Executing Hangup("Zap/7-1", "") in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on 'Zap/7-1' in macro 'hangupcall'
== Spawn extension (default, s, 2) exited non-zero on 'Zap/7-1'
-- Hungup 'Zap/7-1'
-- Executing Macro("Zap/14-1", "hangupcall") in new stack
-- Executing ResetCDR("Zap/14-1", "w") in new stack
-- Executing NoCDR("Zap/14-1", "") in new stack
-- Executing Wait("Zap/14-1", "5") in new stack
-- Executing Hangup("Zap/14-1", "") in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on 'Zap/14-1' in macro 'hangupcall'
== Spawn extension (default, s, 2) exited non-zero on 'Zap/14-1'
-- Hungup 'Zap/14-1'
----------------------------
------------------outbound call
-- Executing SetVar("SIP/4901-cd04", "OUTNUM=mynum") in new stack
-- Executing Cut("SIP/4901-cd04", "custom=OUT_1|:|1") in new stack
-- Executing GotoIf("SIP/4901-cd04", "0?19") in new stack
-- Executing Dial("SIP/4901-cd04", "ZAP/g0/mynum") in new stack
-- Called g0/mynum
-- Zap/1-1 answered SIP/4901-cd04
-- Hungup 'Zap/1-1'
---------------------------
[zaptel.conf]
span=1,1,0,d4,ami # have tried with 1,0,0 - same problem
fxsks=1-24
loadzone = us
defaultzone=us
[zapata.conf]
[channels]
signalling=fxs_ks
group=0
;context=incoming
channel=>1-24
echocancelwhenbridged=yes
echotraining=400
context=default
faxdetect=incoming
;Include genzaptelconf configs
#include zapata-auto.conf
;Include AMP configs
#include zapata_additional.conf
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
