> Hi, > > I have a little situation here :( Perhaps somebody can give me a > hand with it. > > I have an Asterisk working, and in another office, a Sipura > SPA-3000. > I configured the SPA and I have the extension working, the incomming > trunk working, but the outgoing trunk (peer) does not work. > > The issue is that I have a dynamic IP where the SPA is, and neither > the SPA nor my router have DynamicDNS. > So, if I manually change the host for the peer for the SPA PSTN > Line, then everything works fine, and I can make local calls through it. > BUT when my router's IP changes... I am lost. (EVEN while the > extension SPAN Line 1, or the incomming trunk are registered and DO work.) > > According to what I read, if I setup the outgoing trunk to type=peer > with host=dynamic, then I can make the peer to register itself into the > Asterisk, so the asterisk will know where to contact the peer. > But.... I cannot figure out how to make the SPA register as the > peer? I can make it register as a type=friend for the incomming traffic, but > not as a peer..
Don't bother with the peer. Define both the Line1 and PSTN ports on the SPA to register with asterisk using different UserID/Passwords for each, use port 5060 for one and 5061 for the other, and in asterisk's sip.conf file define them as type=friend. It does work just fine that way. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users