|
I dont know if it will work or not but have you
tried setting each card up with different gains?
I am not sure if the variables are global or not,
but when I installed an FXO card on an [EMAIL PROTECTED] box
and used genzaptelconf, it created a separate file for the FXO with its own rx
settings and was included in zaptel.conf.
----- Original Message -----
Sent: Monday, September 26, 2005 7:28
AM
Subject: Re: [Asterisk-Users] Can't
receive Faxes with Asterisk (help)
I
have already to the highest volume. I have tried with different phones models
and the same results...
On 9/26/05, Steve
Totaro <[EMAIL PROTECTED]>
wrote:
Turn up the volume on your phones?
----- Original Message -----
Sent: Monday, September 26, 2005 6:12
AM
Subject: Re: [Asterisk-Users] Can't
receive Faxes with Asterisk (help)
Hi,
Yes, I have changed it. I tried as you have
done, I put txgain and rxgain to "0" and it was possible receive and
send faxes. I'm using two TDM400P (FXS with 4 ports and FXO with 4
ports). In my tests I'm sending faxes to asterisk from fax machine
connected to one of the FXS ports.
The problem is, if put tx and rx gain to 0 in the conversations
coming from FXO channels hear very very low.
What can I do then, any idea ?
On 9/23/05, Chris <[EMAIL PROTECTED]> wrote:
Are
you trying through Zap channels?
Have you changed the RXGain or
TXGain?
I can send faxes if I use RXGain= 20.0 but I
can not receive unless I
have the RX and TX set to
0.
Chris
----- Original Message -----
From:
<
[EMAIL PROTECTED]>
To: <
asterisk-users@lists.digium.com>
Sent: Friday, September 23,
2005 2:15 PM
Subject: [Asterisk-Users] Can't receive Faxes with
Asterisk (help)
> Hi,
> I
have an Asterisk CVS-HEAD-08/29/05-13:21:43 built on a Redhat 9.
> I have problems to receive faxes with spandsp-0.0.2pre11
and
> libtiff-3.5.7-11.
> I'm trying with a fax machine
Panasonic KX-FT25, 14.4Kbps modem speed.
> I have tested sending a
Fax document from Asterisk to the fax machine,
> it is working
fine, but when I try to receive with asterisk, I receive
>
transmission error on the fax machine side.
>
> my
extensions.conf
>
> exten =>301,2,Background(mp)
>
exten =>fax,1,RxFax(/home/admin/testfax.tif)
>
> and I
have tried with as well. Press * star on the fax machine and
>
after hear the fax tone press the start button to send the
document.
>
> exten =>301,2,Background(mp)
> exten
=>*,1,RxFax(/home/admin/testfax.tif)
>
> Can somebody
help me ?
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com
--
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
No virus found in this incoming message.
Checked by AVG
Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.6/111 - Release
Date: 9/23/05
--
Angel
_______________________________________________
--Bandwidth and
Colocation sponsored by Easynews.com --
Asterisk-Users mailing
list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
No virus found in this incoming message.
Checked by AVG
Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.6/111 - Release Date:
9/23/05
|
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
