I am running Asterisk 1.0.9 and the latest bristuff in combination with a HFC isdn card, connected to a BRI interface. For some reason, I am not able to have it dial out (see below). It exits with DIALSTATUS=CHANUNAVAIL. One thing that may be misconfigured is that it says: Signalling Type: PRI Signalling. How do I change this? Or is this the correct value? I posted my configs below.
------ Console output: (note the PRI Signalling) *CLI> zap show channel 1 Channel: 1 File Descriptor: 17 Span: 1 Extension: Dialing: no Context: default Caller ID string: Destroy: 0 InAlarm: 1 Signalling Type: PRI Signalling Owner: <None> Real: <None> Callwait: <None> Threeway: <None> Confno: -1 Propagated Conference: -1 Real in conference: 0 DSP: no Relax DTMF: yes Dialing/CallwaitCAS: 0/0 Default law: alaw Fax Handled: no Pulse phone: no Echo Cancellation: 128 taps, currently OFF PRI Flags: PRI Logical Span: Implicit Actual Hookstate: Onhook ------ ------ *CLI> bri debug span 1 Enabled debugging on span 1 *CLI> dial 99xxxxxxxxxx *CLI> -- Executing Dial("OSS/dsp", "Zap/g1/xxxxxxxxxx|120") in new stack Unable to create channel of type 'Zap' == Everyone is busy/congested at this time Exiting with DIALSTATUS=CHANUNAVAIL. ------ ------ zapata.conf: [channels] switchtype = euroisdn signalling = bri_cpe_ptmp nationalprefix = 0 internationalprefix = 00 usecallingpres=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5 immediate=no busydetect=no callprogress=no musiconhold=default usecallerid=yes callerid=asreceived immediate=yes signalling=bri_cpe_ptmp group = 1 context=default channel => 1-2 ------ ------ zaptel.conf: span=1,1,3,ccs,ami bchan=1,2 dchan=3 loadzone=nl defaultzone=nl _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users