Trying again... *Summary:* I need to have 2 machines with 4 BRI connections, 2 in NT mode, 2 in TE mode and 1 machines with 2 BRI connections, 1 in NT mode, 1 in TE mode; What card(s) should I put in to these servers?
*The long story:* I have 3 locations I want to connect using (*) servers. 1 of those has a single BRI with a Siemens DECT PABX. 1 of those has two BRI's with 2 Siemens DECT PABX's, each serving a different area. 1 of those has two BRI's and a 2 port Nova Compact PABX with DECT First step would be to set up the (*) servers and have them interconnected. When all of that works we'd go on to connect them to the ISDN and connect the existing PABX's to the servers so we can - for now - maintain the existing environment but use (*) to route traffic on a least cost basis, as well as allow SIP/IAX connections from out of office locations. The machines themselves will not pose much of a problem, but what ISDN hardware would you recommend for this? (1 site with 1 TE and 1 NT mode port, 2 sites with 2 TE and 2 NT mode ports) TIA! -- Francesco Peeters ---- GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 If your program doesn't recognize my signature, please visit http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users